F5F Stay Refreshed Hardware Desktop LED indicator brightened in green.

LED indicator brightened in green.

LED indicator brightened in green.

F
fighterwilliam
Junior Member
25
04-07-2022, 07:13 PM
#1
I own a new Dell 7910 server with 8TB SAS drives and a RAID card. I replaced all the hard drives, installed a BIOS update and reset, cleaned the fan and CPU, removed the memory, and connected an SSD. My problem is that the Dell comes with an ATS Fire Pro GPU Barco MXRT 7500, which is considered a medical GPU. While everything seems to function normally during Windows installation or BIOS setup, I notice issues when entering power-saving mode. The motherboard's green LED flickers green, and the screen goes into sleep after installing drivers for the new GPU. I tried two different GPUs but only the older one worked initially. Now the Fire Pro card is active, but it may shut down once drivers are applied. I think the issue might be related to the power supply or motherboard itself. I've looked into the flashing light video and believe it could point to a power module problem.
F
fighterwilliam
04-07-2022, 07:13 PM #1

I own a new Dell 7910 server with 8TB SAS drives and a RAID card. I replaced all the hard drives, installed a BIOS update and reset, cleaned the fan and CPU, removed the memory, and connected an SSD. My problem is that the Dell comes with an ATS Fire Pro GPU Barco MXRT 7500, which is considered a medical GPU. While everything seems to function normally during Windows installation or BIOS setup, I notice issues when entering power-saving mode. The motherboard's green LED flickers green, and the screen goes into sleep after installing drivers for the new GPU. I tried two different GPUs but only the older one worked initially. Now the Fire Pro card is active, but it may shut down once drivers are applied. I think the issue might be related to the power supply or motherboard itself. I've looked into the flashing light video and believe it could point to a power module problem.