LED display inactive, no screen output.

140

09-09-2018, 11:50 AM

So I purchased a new mobo for my rig. I put everything in the case and made sure everything was in the correct spot and was plugged in correctly. When i turn on the computer I have no display, and the DRAM led turns on, after a few seconds the PC shuts off for 5 seconds then reboots, it goes through this cycle twice and the third time it stays running, and the DRAM led is off. Yet I still have no display, no POST, or any response from the computer at all besides the computer running and fans. I have tried putting the jumper on and resetting the BIOS to default, I tried taking out the CMOS battery and waiting, reseating plugs and the GPU, just about everything. Build: i5 6600k MSI MPG Z390 Gaming plus AMD Rx570 Corsair h70 cooler Corsair vengeance LPX 2x8gb 2.4GHz EVGA 600w WD 2.5 SSD 500gb Kingston 2.5 SSD 120gb

1Nuky22skin

09-09-2018, 11:50 AM #1

TheSlayerLP_YT
Member

09-10-2018, 10:06 AM

The Z390 chipset only accommodates 8 and 9 generation processors. Since the socket connections differ, presumably for power purposes.

TheSlayerLP_YT

09-10-2018, 10:06 AM #2

The Z390 chipset only accommodates 8 and 9 generation processors. Since the socket connections differ, presumably for power purposes.

Suhayb_10
Member

09-11-2018, 09:15 PM

I checked the details and others confirmed it works, so you could go back with the card.

Suhayb_10

09-11-2018, 09:15 PM #3

I checked the details and others confirmed it works, so you could go back with the card.

RepoRizer
Posting Freak

872

09-12-2018, 03:14 AM

He mentioned the information is accurate. The Intel chipset doesn’t back all CPUs, even if they share the same socket. Each generation typically uses a different chipset. Always review the compatibility list before purchasing.

RepoRizer

09-12-2018, 03:14 AM #4

Alyccke
Junior Member

09-12-2018, 06:11 PM

You're looking for a budget-friendly board for your first project. Since this is your debut build, you might want to keep the MSI version you already have.

Alyccke

09-12-2018, 06:11 PM #5

You're looking for a budget-friendly board for your first project. Since this is your debut build, you might want to keep the MSI version you already have.

kingsauron
Member

126

09-19-2018, 09:42 AM

MSI Z270 Gaming Plus or similar Z270, Z170, B250 models? Since the 6600K is unlocked better, opt for Z boards instead...=x

kingsauron

09-19-2018, 09:42 AM #6

MSI Z270 Gaming Plus or similar Z270, Z170, B250 models? Since the 6600K is unlocked better, opt for Z boards instead...=x

Abbasaurus
Member

209

09-19-2018, 10:20 AM

I'll check it out, see if there are alternatives. You don't need an MSI if another driver will suffice.

Abbasaurus

09-19-2018, 10:20 AM #7

I'll check it out, see if there are alternatives. You don't need an MSI if another driver will suffice.

bordbeinsvein
Member

10-08-2018, 07:03 PM

You should mainly rely on Z170 when using Skylake.

bordbeinsvein

10-08-2018, 07:03 PM #8

You should mainly rely on Z170 when using Skylake.

NicknameNumber
Member

179

10-08-2018, 09:01 PM

6600k appears in the z270 compatibility list as well. Not sure, my previous CPU was an i5 3550. Now I'm using an R7 3700x.

NicknameNumber

10-08-2018, 09:01 PM #9

6600k appears in the z270 compatibility list as well. Not sure, my previous CPU was an i5 3550. Now I'm using an R7 3700x.