Learn how to connect a dedicated GPU output via DP Alt Mode from your motherboard's USB-C port.
Learn how to connect a dedicated GPU output via DP Alt Mode from your motherboard's USB-C port.
You're curious about using the ASUS X870i Strix Mobo with DP Alt Mode support. It's possible to run a 4070TI signal through the USB-C port on the motherboard for monitoring. You'll need to adjust certain settings, though—this might add some latency. Just follow your curiosity and proceed carefully.
The mobile device with DPI Alt support on its USB-C connection allows it to transmit the CPU's iGPU video output. Some suggest you can send the video from the dGPU's DP port to the mobile's DP port and then route it via USB-C using DP-ALT mode. I haven't found a live demo of this yet.
Some motherboards include a DP *in* port specifically for this use case, which differs from a DP *out* port. Connecting an external DP to a USB-C signal works through supported technology, whether via Thunderbolt chipsets or other USB 3.x solutions (I've tried both). If your CPU features a graphics processing unit, you can route the GPU's rendered frames through the iGPU to show on DP-alt mode—similar to laptops with dedicated GPUs. Without an iGPU or a DP port, no further action is possible. Using this setup incurs a cost in PCIe bandwidth and latency (the time it takes for frames to travel back from the GPU), though this is typically minimal, especially on gaming laptops.
Referring to the settings displayed in the video...? It's possible Microsoft has shifted away from them, though they might still exist. You're likely thinking of a "mux switch" used as a workaround so both the integrated graphics and dedicated GPU could control the same display panel—eliminating latency or frame rate issues when sending frames back to the iGPU, while also preventing the dGPU from handling basic tasks. This approach wasn't widely adopted outside top-tier gaming laptops.