F5F Stay Refreshed Hardware Desktop Latest PC setup fails to boot again after power off

Latest PC setup fails to boot again after power off

Latest PC setup fails to boot again after power off

M
michal070804
Member
129
12-16-2023, 06:18 PM
#1
M
michal070804
12-16-2023, 06:18 PM #1

P
Pickmaster12
Senior Member
710
12-20-2023, 12:30 AM
#2
I’d also check for an updated bio and see if it makes a difference.
P
Pickmaster12
12-20-2023, 12:30 AM #2

I’d also check for an updated bio and see if it makes a difference.

0
0Slender0
Member
211
12-27-2023, 12:53 PM
#3
Ended up returning the motherboard via RMA, it’s brand new. I’ll update once I receive the replacement. Attempted to flash the BIOS on the board, but it didn’t complete. The version remained stuck at 1004 for the Asus Prime h310m-a r2.0.
0
0Slender0
12-27-2023, 12:53 PM #3

Ended up returning the motherboard via RMA, it’s brand new. I’ll update once I receive the replacement. Attempted to flash the BIOS on the board, but it didn’t complete. The version remained stuck at 1004 for the Asus Prime h310m-a r2.0.

D
Drago776
Member
59
12-28-2023, 10:16 PM
#4
Further troubleshooting: Consider replacing the motherboard; BIOS update to the latest version from ASUS website resolved most issues. Display now prefers PEG mode, but disabling internal graphics in ASUS BIOS isn't possible. Every time I shut down the PC, I need to remove and reinsert the graphics card. Only after that does the system respond to the power button. All other components except the graphics card have been replaced, which was a surprise gift. Current build: i79700 ASUS H310M-A R2.0 Corsair Vengance 2x16GB 3200 RAM Thermaltake 700W power supply 1TB Samsung M.2 storage Noctua NH-U12S cooler (1 fan) RTX 2070 help... Frustrated....
D
Drago776
12-28-2023, 10:16 PM #4

Further troubleshooting: Consider replacing the motherboard; BIOS update to the latest version from ASUS website resolved most issues. Display now prefers PEG mode, but disabling internal graphics in ASUS BIOS isn't possible. Every time I shut down the PC, I need to remove and reinsert the graphics card. Only after that does the system respond to the power button. All other components except the graphics card have been replaced, which was a surprise gift. Current build: i79700 ASUS H310M-A R2.0 Corsair Vengance 2x16GB 3200 RAM Thermaltake 700W power supply 1TB Samsung M.2 storage Noctua NH-U12S cooler (1 fan) RTX 2070 help... Frustrated....