Laptop ram vs pc ram
Laptop ram vs pc ram
Hi,
Your questions are clear.
For the first point, with 16GB RAM on your PC, exceeding 21.7GB in use could cause performance issues, slowdowns, or crashes, especially if the browser closes unexpectedly.
Regarding the second question, a laptop would likely require more RAM than a desktop to handle similar software and usage patterns effectively.
The computer is unlikely to stop working, but may run slowly and experience lag. (it could even freeze in some situations). Because the RAM is full, it relies on a page file, transferring data from RAM to storage.
Also, with limited RAM, applications must use as little of it as possible, making everything feel slower.
Are you wondering if the page file matches virtual memory? I checked a guide at makeuseof and found a related article. How much virtual memory can be used on my system? My PC shows Virtual Memory currently allocated as 18700MB, and a screenshot is available here. The question is whether having 16GB of RAM with 21.7GB in use will work, since it seems like 16GB plus 18.7GB would give 34.7GB total memory.
Technically,
yes
but I’m unsure because I can’t test it.
What type of storage device are you using?
Because performance varies with different storage types, if it’s slow the results will be very poor. Even with fast storage, smooth performance isn’t guaranteed.
The maximum virtual memory allowed, according to other sources, is in the terabyte range (?) Could someone verify this for me?
The term "storage device" refers to the Samsung 990 Pro SSD or the 3.5 inch 4GB WD Blue HDD depending on your setup.
Pagefile serves as virtual memory, generated by Windows when there isn’t enough RAM available. Running on an SSD makes it significantly quicker than on traditional HDDs, though RAM remains faster overall—just ensure you get what you need. Enabling Windows to handle the pagefile automatically helps address RAM shortages, but it isn’t flawless; the pagefile can still expand even with ample RAM. The main issues arise if you’re concerned about write endurance or insufficient storage space on the drive, which may impact performance. It’s advisable to maintain at least 20% free space on an SSD when using the pagefile.
Don't worry.
Every display of task master memory from any pc will show a similar 68% usage.
This happens because windows keeps unused code in ram ready for quick reuse, reserving a portion of the remaining space.
The test for enough ram is if windows needs to swap code in and out due to a lack of memory.
Check the task monitor or resource monitor while under load.
Examine the memory tab and the hard page fault column.
If you notice a steady hard fault page rate higher than zero, you can increase your ram usage.
A few hundred varies, it isn't set, occasionally close to 100 or occasionally near 900.