F5F Stay Refreshed Hardware Desktop It starts up after disconnecting and reconnecting the power cord, otherwise it launches into BIOS.

It starts up after disconnecting and reconnecting the power cord, otherwise it launches into BIOS.

It starts up after disconnecting and reconnecting the power cord, otherwise it launches into BIOS.

M
MarChikyLl_PvP
Junior Member
38
05-20-2021, 07:58 AM
#1
Hello, I own a PC equipped with a ROG Strix RTX 2060 Super and a Ryzen 7 3700X. When I power it on, I see the BIOS screen appear. If I disconnect the power cable and reconnect it, then restart, the system boots into Windows. Even when the power cord is unplugged overnight and I turn it back on in the morning, I still land on the BIOS. I recently updated the BIOS and installed a new Windows 11 version.
M
MarChikyLl_PvP
05-20-2021, 07:58 AM #1

Hello, I own a PC equipped with a ROG Strix RTX 2060 Super and a Ryzen 7 3700X. When I power it on, I see the BIOS screen appear. If I disconnect the power cable and reconnect it, then restart, the system boots into Windows. Even when the power cord is unplugged overnight and I turn it back on in the morning, I still land on the BIOS. I recently updated the BIOS and installed a new Windows 11 version.

M
MrAredyan
Junior Member
12
05-20-2021, 03:14 PM
#2
It seems like this might be a setting within the bios. You might need to explore or adjust the bios options.
M
MrAredyan
05-20-2021, 03:14 PM #2

It seems like this might be a setting within the bios. You might need to explore or adjust the bios options.

J
john729
Member
65
05-21-2021, 12:04 AM
#3
It seems the CMOS battery could be depleted, causing it to lose your configuration when the power supply is disabled. If it runs low, the system will need a full reset—boot, save data, then restart with functional settings.
J
john729
05-21-2021, 12:04 AM #3

It seems the CMOS battery could be depleted, causing it to lose your configuration when the power supply is disabled. If it runs low, the system will need a full reset—boot, save data, then restart with functional settings.

T
TwinDiamond
Member
137
05-21-2021, 02:14 PM
#4
I'll try that, thank you.
T
TwinDiamond
05-21-2021, 02:14 PM #4

I'll try that, thank you.

2
214starspy
Junior Member
3
05-22-2021, 03:46 AM
#5
It requires a cr2032 cell.
2
214starspy
05-22-2021, 03:46 AM #5

It requires a cr2032 cell.