It looks like you might have accidentally damaged a USB drive.
It looks like you might have accidentally damaged a USB drive.
I managed to secure the USB without a switch, but I need to adjust the software settings. The formatting commands didn’t help, so I’ll try a different approach.
Check this method first: http://www.pcadvisor.co.uk/how-to/storag...ash-drive/ If it doesn’t help, I’ll walk you through formatting the flash drive using a Linux boot disk. REMEMBER: All your information will be deleted.
Diskpart> select disk # Diskpart>clean If that doesn't work, there are still several commands to attempt... Keep going.
diskpart>select disk # diskpart>list partition diskpart>select partition # diskpart>delete partition override If that fails, you have two choices: you must use Linux to format the drive, or your flash drive is damaged from excessive read/write cycles on the NAND flash.