It gets really warm while you're gaming.
It gets really warm while you're gaming.
I recently acquired a 3070 processor and installed it on my PC. I’ve been experimenting with it and decided to run Borderlands 3 at ultra settings on a 2560x1440p display. My old Ryzen 5 1600 is quite hot during gameplay, though it does have the stock cooler, which isn’t running at full capacity—around 70% usage. The CPU temperature consistently stays around 82°C, and the GPU is near 80°C, with a noticeable increase in noise. I plan to upgrade to a Ryzen 5 5600X soon, but for now, I’m checking if the current temperatures are safe for the CPU.
The CPU works well when it maintains a stable temperature. Your RTX 3070 FE is a direct Nvidia product, which should perform consistently.
I wouldn't be concerned below 80, but between 80 and 85 I'd just monitor it closely to avoid overheating. The GPU begins throttling around 83°C, so 80°C is quite near that threshold—possibly already experiencing some throttling. Removing the side panel might help with thermal management.
Sure, here are some CPU cooler suggestions you can consider for your current setup. For your 1600 and 5600X, look into affordable side-mounted or full-height coolers that fit your case. They’re easy to install and often provide good cooling without breaking the bank. As for keeping your GPU cool, maintaining a stable temperature around 80°C is key—make sure your case has proper airflow and consider adding a small fan if needed.
Arctic Freezer 34 is a solid choice. It tends to be affordable and offers better value than more expensive coolers. The Hyper 212 Black Edition is another strong contender; I own one and find it quite capable, though the Freezer 34 might edge out slightly in performance while being marginally pricier. Have you explored adjusting the GPU voltage? I’m not very experienced with Nvidia’s undervolting process, but this resource should assist. You can also lower the CPU voltage if you’re comfortable doing so.
I agree with @Pixelfie that Arctic Freezer 34 and Hyper 212 would work well. I suggest a more affordable option with RGB lighting: Wraith Prism, second-hand. You can usually find it for $20–30, and there are even used units still with paste applied. It supports both 1600 and 5600x and is great for future upgrades.
this approach works well overall, but if you're not using the CPU-intensive part, it's acceptable for the GPU. You can test airflow by taking off the side panel or lowering the GPU voltage to around 85% power. This won't affect game performance, but it will reduce temperatures and noise significantly.
I tried the undervolting but wasn't sure if it helped. I haven't used MSI Afterburner much before. Should I repeat this each time I boot up? On the video you showed, the core clock was set to -250mhz and the memory clock to +800, but after loading Afterburner both values reset to zero. Also, when I turned off the side panel, the CPU was around 82 and GPU about 80, while with it on it was 65 and 74 respectively.
Pressing the Windows logo in Afterburner will automatically load each time you boot up your PC, eliminating the need for repeated setup. This suggests a possible airflow problem. Could you tell me what case you're using and how many fans it has?