F5F Stay Refreshed Hardware Desktop It fluctuates between working and not working.

It fluctuates between working and not working.

It fluctuates between working and not working.

K
KarmenPlays
Member
72
11-04-2020, 06:51 AM
#1
I face a puzzling issue with my 3080 fe. Occasionally the GPU turns on and functions normally, but other times it powers up and then the graphics stop mid-browse, even under light usage. At other times the system boots without the GPU responding. I’ve learned to press the adapter firmly into the GPU port to get it working, though this didn’t always help. Sometimes I switch off the power supply from its back switch, hold the power button, and then it works again. Even with those adjustments, it still doesn’t function properly, so I try swapping the connections on the GPU adapter that connect to the main PSU. However, I don’t have anyone who can replace the PSU, and I want to avoid spending money if this isn’t the root cause. What might be wrong? Could it be the GPU, the PSU, the adapter, or something else? My motherboard is a Z270p D3, with multiple drives—SSD, HDDs, external SSDs, and more—connected simultaneously. I’m using an Evga Supernova 750 G2 80plus Gold PSU and the included GPU power adapter. I’ve also removed the CMOS battery to discharge any leftover power, replaced it with a new one, reinstalled the latest BIOS, cleaned the 16-pin slot, and reinserted the two 8GB RAM sticks. Any advice would be appreciated.
K
KarmenPlays
11-04-2020, 06:51 AM #1

I face a puzzling issue with my 3080 fe. Occasionally the GPU turns on and functions normally, but other times it powers up and then the graphics stop mid-browse, even under light usage. At other times the system boots without the GPU responding. I’ve learned to press the adapter firmly into the GPU port to get it working, though this didn’t always help. Sometimes I switch off the power supply from its back switch, hold the power button, and then it works again. Even with those adjustments, it still doesn’t function properly, so I try swapping the connections on the GPU adapter that connect to the main PSU. However, I don’t have anyone who can replace the PSU, and I want to avoid spending money if this isn’t the root cause. What might be wrong? Could it be the GPU, the PSU, the adapter, or something else? My motherboard is a Z270p D3, with multiple drives—SSD, HDDs, external SSDs, and more—connected simultaneously. I’m using an Evga Supernova 750 G2 80plus Gold PSU and the included GPU power adapter. I’ve also removed the CMOS battery to discharge any leftover power, replaced it with a new one, reinstalled the latest BIOS, cleaned the 16-pin slot, and reinserted the two 8GB RAM sticks. Any advice would be appreciated.

G
GolDaM
Junior Member
28
11-04-2020, 07:09 AM
#2
Check for a snug seal between the adapter and the side panel of the case.
G
GolDaM
11-04-2020, 07:09 AM #2

Check for a snug seal between the adapter and the side panel of the case.

B
Babyl0l
Member
201
11-11-2020, 11:44 AM
#3
No there is plenty of room. I don’t use the side panel as the case is basic and this gives plenty of air flow. There’s nothing in the way of the card slotting in either. Slots in clean and clicks nicely. Just like it was when I got it new. I’ve even tried the different slots for the gpu but the same issue.
B
Babyl0l
11-11-2020, 11:44 AM #3

No there is plenty of room. I don’t use the side panel as the case is basic and this gives plenty of air flow. There’s nothing in the way of the card slotting in either. Slots in clean and clicks nicely. Just like it was when I got it new. I’ve even tried the different slots for the gpu but the same issue.

A
amethyst_swirl
Junior Member
8
12-01-2020, 06:46 AM
#4
That’s a helpful observation. It’s odd that pressure on the adapter/socket triggers the graphics card. I’m worried that excessive force might damage the solder joints holding the pins for power. My main concern is whether the problem stems from a faulty adapter, rather than an issue with the power supply.
A
amethyst_swirl
12-01-2020, 06:46 AM #4

That’s a helpful observation. It’s odd that pressure on the adapter/socket triggers the graphics card. I’m worried that excessive force might damage the solder joints holding the pins for power. My main concern is whether the problem stems from a faulty adapter, rather than an issue with the power supply.

M
muffles45
Member
189
12-15-2020, 07:10 AM
#5
You're considering a budget-friendly adaptor option. That's a smart move to avoid future complications.
M
muffles45
12-15-2020, 07:10 AM #5

You're considering a budget-friendly adaptor option. That's a smart move to avoid future complications.

X
xX_pgmdu92_Xx
Member
213
12-25-2020, 05:10 AM
#6
I'm aware that EVGA produces dedicated 12VHPWR 30-series graphics cards starting around $40, which seems quite high. However, since they're made by a trusted manufacturer rather than generic adapters on Amazon, it's worth keeping in mind. For precise PSU compatibility, their recommended power supplies are the 220-G2-0750-X2 and 220-G2-0750-X3 models from EVGA. Note: These are 750W G2 units—X2 is for EU markets and X3 for UK. https://www.evga.com/products/product.as...NK-3000-B9
X
xX_pgmdu92_Xx
12-25-2020, 05:10 AM #6

I'm aware that EVGA produces dedicated 12VHPWR 30-series graphics cards starting around $40, which seems quite high. However, since they're made by a trusted manufacturer rather than generic adapters on Amazon, it's worth keeping in mind. For precise PSU compatibility, their recommended power supplies are the 220-G2-0750-X2 and 220-G2-0750-X3 models from EVGA. Note: These are 750W G2 units—X2 is for EU markets and X3 for UK. https://www.evga.com/products/product.as...NK-3000-B9

L
LennyLPHD
Junior Member
41
01-01-2021, 02:58 AM
#7
Thank you very much for the assistance you've given. It means a lot. Have a wonderful day!
L
LennyLPHD
01-01-2021, 02:58 AM #7

Thank you very much for the assistance you've given. It means a lot. Have a wonderful day!

X
xXEmoQueenXx
Junior Member
25
01-04-2021, 02:14 PM
#8
X
xXEmoQueenXx
01-04-2021, 02:14 PM #8

F
Frank_14_
Junior Member
3
01-04-2021, 04:14 PM
#9
Sounds like a poor PCIE connection to me, make sure whatever you’re using is connected properly into x16 PCIE slot firmly.
F
Frank_14_
01-04-2021, 04:14 PM #9

Sounds like a poor PCIE connection to me, make sure whatever you’re using is connected properly into x16 PCIE slot firmly.

5
546007
Member
206
01-06-2021, 01:31 PM
#10
Thank you for the reply. The setup is in place and I’m experiencing the same issue even after changing slots and cleaning the area. The graphics card appears to be in good condition.
5
546007
01-06-2021, 01:31 PM #10

Thank you for the reply. The setup is in place and I’m experiencing the same issue even after changing slots and cleaning the area. The graphics card appears to be in good condition.