Issues with the Ram Upgrade
Issues with the Ram Upgrade
Hello, I'm working with an MSI X570-Gaming Plus board and a Ryzen 5 3600x. Initially, I used a TForce Delta RGB with 2x8GB RAM at 3200mhz and it worked fine. Recently, I purchased the same setup for 4x8GB RAM in my four DIMM slots. The issue is that it only boots at 2400mhz, even when I enable XMP profiles or manually set the DRAM frequency to 3200mhz on the BIOS. I'm seeking advice from anyone here.
Consider removing the existing kit from the setup and installing the new one to test XMP functionality. This approach helps determine if incompatibility exists between the kits or if a faulty DIMM is the issue.
I've also used the updated 2x8GB models, and they function perfectly at 3200mhz.
I attempted to swap the older pair to positions 2 and 4, while moving the newer ones to 1 and 3, and back again. It operates at the default 2400MHz, but fails at XMP1/2 with 3200MHz.
I attempted to swap the older pair to positions 2 and 4, while moving the newer one to 1 and 3, and back again. It operates at the default 2400MHz, but fails at XMP1/2 with 3200MHz.
Consider keeping the kits together rather than separating them. The new kit reduces brightness to 3/4 while the old one remains at 1/2.
It functioned effectively. The stress test will identify any issues before use.