F5F Stay Refreshed Hardware Desktop Issues with the front panel power button on a PC case?

Issues with the front panel power button on a PC case?

Issues with the front panel power button on a PC case?

B
B3NP
Member
172
02-27-2023, 04:47 AM
#1
I'm experiencing issues with my front panel power switch. Sometimes the button won't activate the PC when entering sleep or off mode without a complete shutdown. I'm trying to unplug, inspect, and then plug it back in to see if that resolves the problem. I'm wondering if using a better grip tool would help, since the switches are small and delicate. Would parallel pliers or something similar be suitable?
B
B3NP
02-27-2023, 04:47 AM #1

I'm experiencing issues with my front panel power switch. Sometimes the button won't activate the PC when entering sleep or off mode without a complete shutdown. I'm trying to unplug, inspect, and then plug it back in to see if that resolves the problem. I'm wondering if using a better grip tool would help, since the switches are small and delicate. Would parallel pliers or something similar be suitable?

E
E4endermen
Junior Member
35
02-27-2023, 10:56 AM
#2
You can shift the connector side back and forth while pulling away from the connector/headers on the motherboard. Just a note, you may wish to rethink pointing the finger at the switch. Likely, board/system configurations aren't configured to wake from sleep.
E
E4endermen
02-27-2023, 10:56 AM #2

You can shift the connector side back and forth while pulling away from the connector/headers on the motherboard. Just a note, you may wish to rethink pointing the finger at the switch. Likely, board/system configurations aren't configured to wake from sleep.

B
bennieweir
Junior Member
14
02-28-2023, 10:38 PM
#3
It's likely that board or system configurations aren't configured to wake from sleep.
Occasionally it does wake, other times it doesn't. The same applies to the off mode.
B
bennieweir
02-28-2023, 10:38 PM #3

It's likely that board or system configurations aren't configured to wake from sleep.
Occasionally it does wake, other times it doesn't. The same applies to the off mode.

L
Lucosity12
Junior Member
17
03-01-2023, 03:34 AM
#4
You may wish to include a video of your connector/case front panel just in case you encounter anything unusual....
Alright, I'll do it tomorrow... I'm getting ready to sleep. Thanks.
L
Lucosity12
03-01-2023, 03:34 AM #4

You may wish to include a video of your connector/case front panel just in case you encounter anything unusual....
Alright, I'll do it tomorrow... I'm getting ready to sleep. Thanks.

X
XxMelindaxXBAE
Member
59
03-01-2023, 12:00 PM
#5
A simpler method to verify the switch is to employ a multimeter set to resistance mode. Take out the switch's two-prong header from the motherboard and attach one probe to each pin of the plug. It should display OL, showing no conductivity. Then press and hold the power button switch. The meter should show 0, indicating complete conductivity. If this happens, the switch and wiring are correct, and the issue must be elsewhere.
X
XxMelindaxXBAE
03-01-2023, 12:00 PM #5

A simpler method to verify the switch is to employ a multimeter set to resistance mode. Take out the switch's two-prong header from the motherboard and attach one probe to each pin of the plug. It should display OL, showing no conductivity. Then press and hold the power button switch. The meter should show 0, indicating complete conductivity. If this happens, the switch and wiring are correct, and the issue must be elsewhere.

L
lulugdb
Member
174
03-01-2023, 06:21 PM
#6
Initially verify that the front panel power switch pair are firmly linked to the motherboard front panel header pins. Check the power on/off feature by connecting the two pins together. If it functions properly, the issue likely lies with the switch or cables. Your case maker might offer a replacement part. As an alternative, consider purchasing a remote front panel switch from the provided link.
L
lulugdb
03-01-2023, 06:21 PM #6

Initially verify that the front panel power switch pair are firmly linked to the motherboard front panel header pins. Check the power on/off feature by connecting the two pins together. If it functions properly, the issue likely lies with the switch or cables. Your case maker might offer a replacement part. As an alternative, consider purchasing a remote front panel switch from the provided link.

Z
zeliotL
Member
211
03-01-2023, 07:24 PM
#7
My case is a Phanteks Enthoo 719 Black Full Tower Case.
https://www.pbtech.co.nz/product/CHAPHA6...e-Tempered
Z
zeliotL
03-01-2023, 07:24 PM #7

My case is a Phanteks Enthoo 719 Black Full Tower Case.
https://www.pbtech.co.nz/product/CHAPHA6...e-Tempered

T
totimen23
Junior Member
47
03-01-2023, 08:00 PM
#8
When the internal connections appear satisfactory, reach out to Phanteks customer support to obtain a replacement panel.
T
totimen23
03-01-2023, 08:00 PM #8

When the internal connections appear satisfactory, reach out to Phanteks customer support to obtain a replacement panel.