F5F Stay Refreshed Hardware Desktop Issues with performance following a hardware upgrade

Issues with performance following a hardware upgrade

Issues with performance following a hardware upgrade

Pages (2): 1 2 Next
S
sacapatates
Posting Freak
843
02-07-2021, 03:29 AM
#1
Hello. I'm experiencing some performance problems after upgrading my computer. I recently installed an Intel Core i5 12600KF, ASUS PRIME H610M WIFI D4, 2x8 Gb Kingston FURY Beast 3200mhz and a Kingston Fury Renegade PCie M.2 NVME SSD. It's paired with a Gigabyte 3070TI and a 1000w EVGA Supernova PSU. Previously I had an i7 6700k, MSI Z170A, 16gb 2800mhz DDR4 and an 8-year-old SSD. At 1440p resolution, I see 40-60 fps in games like MW2 and The Hunter++. I've tried various benchmarking tools but results differ. Sometimes the whole system freezes during gaming, forcing a restart. I've reinstalled Windows on the new SSD, updated drivers, enabled XMP, checked power plans, and flashed the BIOS. Any advice?
S
sacapatates
02-07-2021, 03:29 AM #1

Hello. I'm experiencing some performance problems after upgrading my computer. I recently installed an Intel Core i5 12600KF, ASUS PRIME H610M WIFI D4, 2x8 Gb Kingston FURY Beast 3200mhz and a Kingston Fury Renegade PCie M.2 NVME SSD. It's paired with a Gigabyte 3070TI and a 1000w EVGA Supernova PSU. Previously I had an i7 6700k, MSI Z170A, 16gb 2800mhz DDR4 and an 8-year-old SSD. At 1440p resolution, I see 40-60 fps in games like MW2 and The Hunter++. I've tried various benchmarking tools but results differ. Sometimes the whole system freezes during gaming, forcing a restart. I've reinstalled Windows on the new SSD, updated drivers, enabled XMP, checked power plans, and flashed the BIOS. Any advice?

H
Happy_M00N
Junior Member
2
02-20-2021, 04:22 AM
#2
Typically, most B660 boards feature less powerful VRM, while your selected H610 model performs even worse.
H
Happy_M00N
02-20-2021, 04:22 AM #2

Typically, most B660 boards feature less powerful VRM, while your selected H610 model performs even worse.

I
Isolatid
Member
59
02-20-2021, 06:04 AM
#3
It's odd they released these CPUs with compatibility features. From a technical standpoint, it seems like a fraud—something that barely functions at all.
I
Isolatid
02-20-2021, 06:04 AM #3

It's odd they released these CPUs with compatibility features. From a technical standpoint, it seems like a fraud—something that barely functions at all.

B
Bibergirl
Junior Member
20
02-20-2021, 08:49 AM
#4
Use a fan to cool the VRM, then re-test. Measure CPU, motherboard, and VRM temps during stress. Run Cinebench R23 and 3DMark Firestrike, then display the results for comparison with other systems.
B
Bibergirl
02-20-2021, 08:49 AM #4

Use a fan to cool the VRM, then re-test. Measure CPU, motherboard, and VRM temps during stress. Run Cinebench R23 and 3DMark Firestrike, then display the results for comparison with other systems.

M
Mispisek
Member
177
02-20-2021, 12:21 PM
#5
I'll review the remaining content tomorrow. This test was from yesterday.
M
Mispisek
02-20-2021, 12:21 PM #5

I'll review the remaining content tomorrow. This test was from yesterday.

F
FarbCleX
Junior Member
38
03-08-2021, 07:35 PM
#6
The graphics score should fall between 14,000 and 15,000 in 3DMark Timespy. Your unit only slightly exceeds half of that range. The CPU performance is around 13,000, while yours is 11,000—this might be linked to the motherboard. There could be an issue hindering your GPU from operating optimally. Are you possibly enabling V-Sync continuously?
F
FarbCleX
03-08-2021, 07:35 PM #6

The graphics score should fall between 14,000 and 15,000 in 3DMark Timespy. Your unit only slightly exceeds half of that range. The CPU performance is around 13,000, while yours is 11,000—this might be linked to the motherboard. There could be an issue hindering your GPU from operating optimally. Are you possibly enabling V-Sync continuously?

_
_juhuaxia12
Member
61
03-23-2021, 11:29 PM
#7
Attempted DDU and updated drivers, yet issues persist in TimeSpy. How can I verify if V-sync is active? The G-sync setting appears to be off in the control panel...
_
_juhuaxia12
03-23-2021, 11:29 PM #7

Attempted DDU and updated drivers, yet issues persist in TimeSpy. How can I verify if V-sync is active? The G-sync setting appears to be off in the control panel...

V
Visker124
Junior Member
36
03-24-2021, 09:00 AM
#8
In the NVIDIA control panel it seems. You might be using RivaTuner to restrict frames. Verify if the iobit driver booster is installed, as missing drivers could be the issue.
V
Visker124
03-24-2021, 09:00 AM #8

In the NVIDIA control panel it seems. You might be using RivaTuner to restrict frames. Verify if the iobit driver booster is installed, as missing drivers could be the issue.

H
huuskyjerk
Member
170
03-24-2021, 03:33 PM
#9
I don't have RivaTuner installed. The V-sync isn't available in the NVIDIA control panel. IObot lists some USB devices and sound options, but mostly basic drivers. For the pro version, you'll need Windows Visual C++ development files. There are six of those, plus the last one is Microsoft XNA Framework Redistributable 4.0.
H
huuskyjerk
03-24-2021, 03:33 PM #9

I don't have RivaTuner installed. The V-sync isn't available in the NVIDIA control panel. IObot lists some USB devices and sound options, but mostly basic drivers. For the pro version, you'll need Windows Visual C++ development files. There are six of those, plus the last one is Microsoft XNA Framework Redistributable 4.0.

D
doglover4421
Member
112
03-25-2021, 05:39 PM
#10
Check the GPU settings and consider reloading it. A screenshot of GPU-Z can help verify the status.
D
doglover4421
03-25-2021, 05:39 PM #10

Check the GPU settings and consider reloading it. A screenshot of GPU-Z can help verify the status.

Pages (2): 1 2 Next