F5F Stay Refreshed Hardware Desktop Issues with my old computer are causing problems.

Issues with my old computer are causing problems.

Issues with my old computer are causing problems.

G
Gamergal844
Junior Member
18
10-19-2016, 07:50 AM
#1
Hi everyone! I have problem like in this post but i notices that my CPU power plugin one wire is burned, but i change all plug, blean on motherboard, check motherboard back, there is nothing evel brown from burning, yesterday in about 22 i turned it off and all was be fine, now i turn it on and no beep on startav, everytime in normal i have one beep when turn on afte POST check, its more than 12 years old, but for my its really fine pc, i hope there i no big problem. My pc: MB: GA 970A-DS3 CPU: AMD FX6200 (3.8GHz /6 core) GPU: GeForce RTX760 2Gb (if i write correct) RAM: 16Gb (3 planks 2x4Gb and 1x8Gb) Power: Chieftec GPS 700A8 (700W) HDD and else not important, and my favorit old keyboard from 2002, i clean it and change thermal paste 4 days ago and those 4 days use pc and all was just fine, can someone help me? In attachmeni is how looks when burned, but i changet, check voltage and there all fine in both yellow is 12v
G
Gamergal844
10-19-2016, 07:50 AM #1

Hi everyone! I have problem like in this post but i notices that my CPU power plugin one wire is burned, but i change all plug, blean on motherboard, check motherboard back, there is nothing evel brown from burning, yesterday in about 22 i turned it off and all was be fine, now i turn it on and no beep on startav, everytime in normal i have one beep when turn on afte POST check, its more than 12 years old, but for my its really fine pc, i hope there i no big problem. My pc: MB: GA 970A-DS3 CPU: AMD FX6200 (3.8GHz /6 core) GPU: GeForce RTX760 2Gb (if i write correct) RAM: 16Gb (3 planks 2x4Gb and 1x8Gb) Power: Chieftec GPS 700A8 (700W) HDD and else not important, and my favorit old keyboard from 2002, i clean it and change thermal paste 4 days ago and those 4 days use pc and all was just fine, can someone help me? In attachmeni is how looks when burned, but i changet, check voltage and there all fine in both yellow is 12v

G
GENTILPHOQUE
Member
64
10-19-2016, 09:45 AM
#2
It looks like a messy issue, possibly involving the PSU or motherboard. It might be both. You might have made a mistake. Your message is hard to follow.
G
GENTILPHOQUE
10-19-2016, 09:45 AM #2

It looks like a messy issue, possibly involving the PSU or motherboard. It might be both. You might have made a mistake. Your message is hard to follow.

K
Klyner
Member
184
10-19-2016, 12:29 PM
#3
I'm not fully understanding English yet. The PSU is functioning correctly, the motherboard didn't show any damage, and when I turned everything on, all components started working normally except for the constant beep. The fans spun fine, but there were no sounds at all. I tried taking out the hardware, but nothing came out. This seems normal if something serious happened to the motherboard—it's operating without beeps, fans spinning, and all cooling units working properly. The CPU, GPU, PSU, and other parts are fine.
K
Klyner
10-19-2016, 12:29 PM #3

I'm not fully understanding English yet. The PSU is functioning correctly, the motherboard didn't show any damage, and when I turned everything on, all components started working normally except for the constant beep. The fans spun fine, but there were no sounds at all. I tried taking out the hardware, but nothing came out. This seems normal if something serious happened to the motherboard—it's operating without beeps, fans spinning, and all cooling units working properly. The CPU, GPU, PSU, and other parts are fine.

9
905xA
Senior Member
667
11-04-2016, 07:02 AM
#4
You're dealing with a serious issue here. Those components are notorious for damaging PCs and posing fire hazards. Immediately stop using them! They're not safe or reliable. Your system is already struggling, and replacing it with a proper unit is essential. Do you have a budget in mind?
9
905xA
11-04-2016, 07:02 AM #4

You're dealing with a serious issue here. Those components are notorious for damaging PCs and posing fire hazards. Immediately stop using them! They're not safe or reliable. Your system is already struggling, and replacing it with a proper unit is essential. Do you have a budget in mind?

E
Evolution88
Member
216
11-19-2016, 05:50 PM
#5
I used this psu for 10 years and all works grate, before this i was tested same power and this was melted from inside and this was be 10 years ago, this is good manufacturer, i my country use from this and all is fine
E
Evolution88
11-19-2016, 05:50 PM #5

I used this psu for 10 years and all works grate, before this i was tested same power and this was melted from inside and this was be 10 years ago, this is good manufacturer, i my country use from this and all is fine

K
Komodo88
Senior Member
749
11-19-2016, 10:35 PM
#6
It's not. You were lucky it was all that. Chieftec has about three good PSUs? This one isn't one of those. It's a real PC killer—it's dead rn and needs to be fixed.
K
Komodo88
11-19-2016, 10:35 PM #6

It's not. You were lucky it was all that. Chieftec has about three good PSUs? This one isn't one of those. It's a real PC killer—it's dead rn and needs to be fixed.

L
LogicSait
Junior Member
18
12-01-2016, 04:12 PM
#7
I'm not sure if the PSU is faulty, but I check it and it provides required voltages.
L
LogicSait
12-01-2016, 04:12 PM #7

I'm not sure if the PSU is faulty, but I check it and it provides required voltages.

T
TylerSkillz
Member
198
12-07-2016, 10:14 PM
#8
The connection burned out. That means it’s ruined. Or maybe the whole thing got damaged. Either way, don’t rely on that anymore.
T
TylerSkillz
12-07-2016, 10:14 PM #8

The connection burned out. That means it’s ruined. Or maybe the whole thing got damaged. Either way, don’t rely on that anymore.

S
Samda
Member
65
12-08-2016, 04:56 AM
#9
I check all again, i understand in radio electronics and i can tell you thwt all is ok, condensators is fine, visible transistors and chips is ok, almost always is something fried, its visible, even microchips, but i need to get to service tomorrow
S
Samda
12-08-2016, 04:56 AM #9

I check all again, i understand in radio electronics and i can tell you thwt all is ok, condensators is fine, visible transistors and chips is ok, almost always is something fried, its visible, even microchips, but i need to get to service tomorrow