F5F Stay Refreshed Hardware Desktop Issues with microphone sound clarity on the B450M Mortar Max.

Issues with microphone sound clarity on the B450M Mortar Max.

Issues with microphone sound clarity on the B450M Mortar Max.

C
crashing2001
Junior Member
17
02-02-2019, 05:32 AM
#1
I recently enhanced my PC with a Ryzen 5 3600, a Gigabyte RX 5700 XT Gaming OC, 32GB G.Skill RipJaws V black RAM, and a MSI B450M Mortar Max motherboard. What bothers me most is the microphone input quality despite the good audio output from the board. I use an Antlion ModMic Uni, which I’m certain delivers superior sound compared to plugging it directly into the motherboard. On my previous system and even on a budget notebook, I experienced clearer audio from the mic. With the B450M Mortar Max it remains very noisy, and even with noise reduction enabled, it still sounds poor. I’ve updated the drivers from MSI but haven’t noticed any improvement. Currently, I’m using a low-cost USB sound card under $10 for the mic, which produces significantly better results than connecting it to the board. Is the microphone jack on the motherboard truly so bad, or are there other ways to enhance the audio quality?
C
crashing2001
02-02-2019, 05:32 AM #1

I recently enhanced my PC with a Ryzen 5 3600, a Gigabyte RX 5700 XT Gaming OC, 32GB G.Skill RipJaws V black RAM, and a MSI B450M Mortar Max motherboard. What bothers me most is the microphone input quality despite the good audio output from the board. I use an Antlion ModMic Uni, which I’m certain delivers superior sound compared to plugging it directly into the motherboard. On my previous system and even on a budget notebook, I experienced clearer audio from the mic. With the B450M Mortar Max it remains very noisy, and even with noise reduction enabled, it still sounds poor. I’ve updated the drivers from MSI but haven’t noticed any improvement. Currently, I’m using a low-cost USB sound card under $10 for the mic, which produces significantly better results than connecting it to the board. Is the microphone jack on the motherboard truly so bad, or are there other ways to enhance the audio quality?

M
mcdgeronimo
Junior Member
8
02-21-2019, 05:21 PM
#2
Configure the recording device for a sample rate of 44100 Hz and bit depth of 16 bits.
M
mcdgeronimo
02-21-2019, 05:21 PM #2

Configure the recording device for a sample rate of 44100 Hz and bit depth of 16 bits.

D
Darby98
Junior Member
17
03-12-2019, 02:19 AM
#3
This version enhances the quality somewhat, though it remains noisy and sounds quite poor. I wouldn't bother even a little if it's only marginally worse, but the difference is stark compared to the external USB soundcard.
D
Darby98
03-12-2019, 02:19 AM #3

This version enhances the quality somewhat, though it remains noisy and sounds quite poor. I wouldn't bother even a little if it's only marginally worse, but the difference is stark compared to the external USB soundcard.

F
frog76
Member
177
03-16-2019, 03:59 PM
#4
Review all additional configurations, turn off extra options. Verify both recording and playback are set to 44100 16-bit, also testing 48000 16-bit if needed.
F
frog76
03-16-2019, 03:59 PM #4

Review all additional configurations, turn off extra options. Verify both recording and playback are set to 44100 16-bit, also testing 48000 16-bit if needed.

S
SkyCrowzK
Member
189
03-28-2019, 04:26 AM
#5
I attempted all possible adjustments in the settings, yet there was no substantial enhancement in microphone audio. The sound remains either too faint, overly loud, or of poor overall quality.
S
SkyCrowzK
03-28-2019, 04:26 AM #5

I attempted all possible adjustments in the settings, yet there was no substantial enhancement in microphone audio. The sound remains either too faint, overly loud, or of poor overall quality.

J
JohanSheep
Junior Member
13
03-28-2019, 06:28 AM
#6
Confirming the minijack setup. Is it stereo or mono?
J
JohanSheep
03-28-2019, 06:28 AM #6

Confirming the minijack setup. Is it stereo or mono?

K
Kingjay8
Junior Member
8
03-28-2019, 06:57 AM
#7
Consider testing the mic on another device or laptop to verify the quality remains poor.
K
Kingjay8
03-28-2019, 06:57 AM #7

Consider testing the mic on another device or laptop to verify the quality remains poor.

I
ishpish2
Member
60
03-29-2019, 12:47 PM
#8
I previously mentioned this. I’m currently using the microphone in my work notebook, and it provides crystal clear audio with no background noise.
I
ishpish2
03-29-2019, 12:47 PM #8

I previously mentioned this. I’m currently using the microphone in my work notebook, and it provides crystal clear audio with no background noise.

M
mat_fram
Posting Freak
776
03-29-2019, 06:32 PM
#9
Can't you RMA the motherboard? If there's something wrong with jack.
M
mat_fram
03-29-2019, 06:32 PM #9

Can't you RMA the motherboard? If there's something wrong with jack.

J
julien190901
Member
192
04-05-2019, 11:36 PM
#10
Tbh I don't even think there is something wrong with the jack. It's not like the jack is physically damaged or the microphone quality is too bad to understand what I am saying with it, but it is just way worse than what I was expecting. I just want to know if this is "normal" or if there could really be something wrong with it. I mean on my old motherboard it was also quite bad but that was a cheap as hell ASRock board from like 5 years ago so I was kinda expecting that, the B450M Mortar Max however cost almost twice as much as my old motherboard and the microphone input still sucks...
J
julien190901
04-05-2019, 11:36 PM #10

Tbh I don't even think there is something wrong with the jack. It's not like the jack is physically damaged or the microphone quality is too bad to understand what I am saying with it, but it is just way worse than what I was expecting. I just want to know if this is "normal" or if there could really be something wrong with it. I mean on my old motherboard it was also quite bad but that was a cheap as hell ASRock board from like 5 years ago so I was kinda expecting that, the B450M Mortar Max however cost almost twice as much as my old motherboard and the microphone input still sucks...