F5F Stay Refreshed Hardware Desktop Issues with elevated idle temperatures on the 3900X

Issues with elevated idle temperatures on the 3900X

Issues with elevated idle temperatures on the 3900X

Pages (2): Previous 1 2
C
Cheeks
Junior Member
17
01-27-2020, 10:46 PM
#11
Have you figured out the issue in a week? The 3900x file is due tomorrow and will be needed for 3D animations—I definitely can't let this slip.
C
Cheeks
01-27-2020, 10:46 PM #11

Have you figured out the issue in a week? The 3900x file is due tomorrow and will be needed for 3D animations—I definitely can't let this slip.

O
Okunino
Posting Freak
845
01-28-2020, 01:18 AM
#12
You won't face this problem if you don't increase the voltage like the op did. I've designed 3 3900x systems and with the wraith prism stock cooler I've never seen them reach such levels.
O
Okunino
01-28-2020, 01:18 AM #12

You won't face this problem if you don't increase the voltage like the op did. I've designed 3 3900x systems and with the wraith prism stock cooler I've never seen them reach such levels.

E
EthanLG
Member
162
01-28-2020, 01:50 AM
#13
Your system is currently running at about 49-55 and 72-77 during load with the Corsair Hydro H100x. The stock BIOS settings seem to be using a relatively high default voltage based on online information.
E
EthanLG
01-28-2020, 01:50 AM #13

Your system is currently running at about 49-55 and 72-77 during load with the Corsair Hydro H100x. The stock BIOS settings seem to be using a relatively high default voltage based on online information.

D
D4rKSlayer95
Member
229
02-04-2020, 12:59 AM
#14
Reset your CPU cooler now.
D
D4rKSlayer95
02-04-2020, 12:59 AM #14

Reset your CPU cooler now.

K
kerem_
Member
204
02-04-2020, 01:08 AM
#15
I experienced the same problem before. Now I don’t have a previous graph to display. My current idle temperatures are near 40 degrees, while the ambient stays around 30-35. Used to be 50-60 for idle. Under voltage is one choice, but I switched to adjusting the CPU clock speed via Windows power settings. When ready for work, I set balanced power to high performance. The biggest issue occurs during balanced power and gaming load—red line shows CPU max near 48-50, green for GPU. Otherwise, compare gaming load before and after.
K
kerem_
02-04-2020, 01:08 AM #15

I experienced the same problem before. Now I don’t have a previous graph to display. My current idle temperatures are near 40 degrees, while the ambient stays around 30-35. Used to be 50-60 for idle. Under voltage is one choice, but I switched to adjusting the CPU clock speed via Windows power settings. When ready for work, I set balanced power to high performance. The biggest issue occurs during balanced power and gaming load—red line shows CPU max near 48-50, green for GPU. Otherwise, compare gaming load before and after.

D
doglover4421
Member
112
02-11-2020, 04:12 AM
#16
Power failed and I switched my PC to battery mode to protect the UPS. All fans stopped spinning, and my idle temperature fell from 55-60°C to 36°C. I have a Noctua D15S cooler and am on the verge of running out of power, with PBO enabled.
D
doglover4421
02-11-2020, 04:12 AM #16

Power failed and I switched my PC to battery mode to protect the UPS. All fans stopped spinning, and my idle temperature fell from 55-60°C to 36°C. I have a Noctua D15S cooler and am on the verge of running out of power, with PBO enabled.

D
DariusPlay
Junior Member
17
02-14-2020, 07:03 AM
#17
3900x is quite a powerful CPU. The performance really depends on the cooling setup, but even with excellent water cooling you can reach 80°C under full load. I run my 3900x on a waterloop with the EDC bug basic configuration, then scale it up to 10x and push the frequency to 500MHz. My clock generator is set to 101.5, which pushes the multi-core clocks up to around 4.7GHz. Keep in mind it gets very hot.
D
DariusPlay
02-14-2020, 07:03 AM #17

3900x is quite a powerful CPU. The performance really depends on the cooling setup, but even with excellent water cooling you can reach 80°C under full load. I run my 3900x on a waterloop with the EDC bug basic configuration, then scale it up to 10x and push the frequency to 500MHz. My clock generator is set to 101.5, which pushes the multi-core clocks up to around 4.7GHz. Keep in mind it gets very hot.

K
kris929
Member
61
02-14-2020, 08:27 AM
#18
When conditions are favorable during testing, cooler temperatures and mounting along with paste work well. If temperatures rise while the system is idle, it suggests you're not truly idle or that power-saving features are off.
K
kris929
02-14-2020, 08:27 AM #18

When conditions are favorable during testing, cooler temperatures and mounting along with paste work well. If temperatures rise while the system is idle, it suggests you're not truly idle or that power-saving features are off.

Pages (2): Previous 1 2