F5F Stay Refreshed Hardware Desktop Issues with Asus B450-F BIOS 4007 B1 & B2 RAM ports Not functioning properly

Issues with Asus B450-F BIOS 4007 B1 & B2 RAM ports Not functioning properly

Issues with Asus B450-F BIOS 4007 B1 & B2 RAM ports Not functioning properly

D
166
06-10-2020, 02:26 PM
#1
I recently purchased the Asus B450-F, opting for the B450-F instead of the Tomahawk Max since it was unavailable. I also added two 8GB Corsair Vengeance 3600MHz CL18 RAM sticks and a Ryzen 5600X. I brought the motherboard along with the CPU to a local shop to upgrade the BIOS for optimal performance. The update worked, but upon returning home, installing the RAM in slots A2 & B2 caused issues: the board lit up orange above the RAM ports and displayed only a black screen. After reviewing the manual and troubleshooting, I managed to boot by removing RAM from B1 & B2 and using just one slot or none at all. When setting the memory profile to 3600MHz, only the A2 slot functioned properly, while A1 showed an orange LED with a black screen. Is this a BIOS problem that can be resolved with an update, or should I consider returning the board? Additionally, I noticed the RAM QVL list was overlooked, and my kit isn’t there. Shouldn’t dual-channel RAM boot at stock speeds regardless of its presence on the list?
D
DerSchnurrbart
06-10-2020, 02:26 PM #1

I recently purchased the Asus B450-F, opting for the B450-F instead of the Tomahawk Max since it was unavailable. I also added two 8GB Corsair Vengeance 3600MHz CL18 RAM sticks and a Ryzen 5600X. I brought the motherboard along with the CPU to a local shop to upgrade the BIOS for optimal performance. The update worked, but upon returning home, installing the RAM in slots A2 & B2 caused issues: the board lit up orange above the RAM ports and displayed only a black screen. After reviewing the manual and troubleshooting, I managed to boot by removing RAM from B1 & B2 and using just one slot or none at all. When setting the memory profile to 3600MHz, only the A2 slot functioned properly, while A1 showed an orange LED with a black screen. Is this a BIOS problem that can be resolved with an update, or should I consider returning the board? Additionally, I noticed the RAM QVL list was overlooked, and my kit isn’t there. Shouldn’t dual-channel RAM boot at stock speeds regardless of its presence on the list?

O
OmqDace
Posting Freak
798
06-10-2020, 06:31 PM
#2
Test each stick separately in its slot to check for post. If no post appears, the board is likely dead and should be replaced. If post appears with all sticks in their slots, another issue may be present.
O
OmqDace
06-10-2020, 06:31 PM #2

Test each stick separately in its slot to check for post. If no post appears, the board is likely dead and should be replaced. If post appears with all sticks in their slots, another issue may be present.

L
leonism
Member
171
06-18-2020, 08:44 AM
#3
While writing, the system started up using RAM at A1 and A2, yet it keeps failing to boot with either of the B1 or B2 drives, even though a stick is present in A1/A2. A1 functions normally at regular speeds but produces the same error when the profile is set. A CMOS reset is necessary to restore functionality.
L
leonism
06-18-2020, 08:44 AM #3

While writing, the system started up using RAM at A1 and A2, yet it keeps failing to boot with either of the B1 or B2 drives, even though a stick is present in A1/A2. A1 functions normally at regular speeds but produces the same error when the profile is set. A CMOS reset is necessary to restore functionality.

S
SevereWarning
Member
64
06-18-2020, 09:09 AM
#4
Verify your CPU and check for any bent pins. If found, the board is likely non-functional and requires replacement.
S
SevereWarning
06-18-2020, 09:09 AM #4

Verify your CPU and check for any bent pins. If found, the board is likely non-functional and requires replacement.

S
SonyaPlay
Junior Member
49
06-18-2020, 10:04 AM
#5
As I wrote
Yes then write in the normal font and don't change it.
This is what happens when you do. (I've not read it either; I only read normal text.)
S
SonyaPlay
06-18-2020, 10:04 AM #5

As I wrote
Yes then write in the normal font and don't change it.
This is what happens when you do. (I've not read it either; I only read normal text.)

M
mumien350
Member
82
06-18-2020, 06:36 PM
#6
No bent pins here. The cooler isn't set too tightly either.
M
mumien350
06-18-2020, 06:36 PM #6

No bent pins here. The cooler isn't set too tightly either.

C
cristo396
Junior Member
11
06-21-2020, 05:32 AM
#7
I'm about to take back the board and retrieve the MSI B450/B550.
C
cristo396
06-21-2020, 05:32 AM #7

I'm about to take back the board and retrieve the MSI B450/B550.

R
Rockran
Junior Member
14
06-21-2020, 02:17 PM
#8
I am also running a Asus B450 F gaming with bios 4007 and a 5800x and i got the exact same problem. Does not boot with memory stick in B1 or B2 with a Ryzen 5000 processor. Works flawless with my 3800x though. When using the 5800x i do know the slots get power cause my memory sticks got LED on them and they light up when i start the computer. Running my 2 16gb sticks in A1 + A2 now w.o. any issues. Correct me if i am wrong, but wouldn't a bent pin on the CPU indicate CPU problem and not RAM problem? Edit: I do not believe it is the CPU, since more people would have this problems no matter what chip/bios they use. Edited December 23, 2020 by tarasus
R
Rockran
06-21-2020, 02:17 PM #8

I am also running a Asus B450 F gaming with bios 4007 and a 5800x and i got the exact same problem. Does not boot with memory stick in B1 or B2 with a Ryzen 5000 processor. Works flawless with my 3800x though. When using the 5800x i do know the slots get power cause my memory sticks got LED on them and they light up when i start the computer. Running my 2 16gb sticks in A1 + A2 now w.o. any issues. Correct me if i am wrong, but wouldn't a bent pin on the CPU indicate CPU problem and not RAM problem? Edit: I do not believe it is the CPU, since more people would have this problems no matter what chip/bios they use. Edited December 23, 2020 by tarasus

M
mrscupcake564
Junior Member
23
06-28-2020, 05:12 AM
#9
It seems like the BIOS is the problem. The Ryzen 3700x works fine, but the 5000 series isn't.
M
mrscupcake564
06-28-2020, 05:12 AM #9

It seems like the BIOS is the problem. The Ryzen 3700x works fine, but the 5000 series isn't.

C
CreeperShocks
Junior Member
37
07-02-2020, 01:52 AM
#10
No, this problem hasn't been resolved yet.
C
CreeperShocks
07-02-2020, 01:52 AM #10

No, this problem hasn't been resolved yet.