Issues with a weak Wi-Fi connection from your modem or router combo.
Issues with a weak Wi-Fi connection from your modem or router combo.
Hey there, I heard you switched ISPs and got cable internet with an ARRIS TG862S combo device. You mentioned the Wi-Fi signal is weak, even though you checked for interference and set the router to maximum power. You tried moving the modem/router around and even used an extender without success—it only works up to about 10 meters, after which it drops significantly. Printing on your wireless printer at 12 meters is no longer possible. What are your options? Should you consider getting a new router, an access point, or an extender? I’m a beginner and want some guidance on what might help. Thanks!
Wires! No more wireless problems anymore! These cables are also significantly cheaper than the alternatives you considered. (just remember not to bump into them) *EDIT: you might also adjust your modem's position. With a good quality cable, you should be able to extend a few meters without losing signal to your modem.*
I've already talked about moving the modem around, but it didn't help much. It should stay in my room because I don't want to run wires everywhere.
Obtain a connection point and turn off Wi-Fi on your provided combo device. TPLink and Ubiquiti offer solid solutions.
Searching for a picture of your modem without any external antennas. In the past, you needed to angle the antenna upward for horizontal signals. If your modem was in a basement while your PC sat above it, adjusting the antenna could boost strength. It’s unclear if this setup is still valid, but flipping the modem horizontally might help.
Consider key factors when choosing an access point. Look for reliable performance, strong coverage, and compatibility with your network setup. For recommendations, popular options include Wi-Fi 6 devices and mesh systems. A router manages multiple networks and traffic routing, while an access point focuses on connecting devices within a specific area.
In home networking, a common guideline states that WiFi routers using the standard 2.4 GHz frequency can cover up to 150 feet inside a building—about 33 feet. That’s quite limited. You might want to contact your broadband service before spending more, since it looks like your modem could have weak or faulty Wi-Fi signals.