Issues with 1080Ti after starting the driver

F5F Stay Refreshed Hardware Desktop Issues with 1080Ti after starting the driver

BoociTulip
Member

11-11-2017, 07:02 AM

Hi, your 1080ti is freezing when the driver initializes, especially with GPU-Z not recognizing CUDA or OpenCL. You've already tried DDU and updated drivers, but it still works with the default display drivers. I'm considering a fresh Windows installation to see if that resolves the issue.

BoociTulip

11-11-2017, 07:02 AM #1

Coolman22345
Junior Member

11-11-2017, 11:25 AM

I believe your card might be faulty. Several older models with 1080 and 1080T designs are prone to failure over time because of their inferior construction. Which one is it? Regardless, attempt to reinstall Windows first.

Coolman22345

11-11-2017, 11:25 AM #2

Shizo_Umera
Member

201

11-11-2017, 12:34 PM

ASUS Founders Edition card

Shizo_Umera

11-11-2017, 12:34 PM #3

ASUS Founders Edition card

Giju
Member

11-11-2017, 06:30 PM

This detection issue appears linked to missing bios data. Refresh using the original card bios, run a diagnostic, and install drivers for testing. If problems persist, clean the PCIe connectors with a Qtip and reinsert.

Giju

11-11-2017, 06:30 PM #4

CavemanShrimp
Junior Member

11-11-2017, 08:01 PM

CavemanShrimp

11-11-2017, 08:01 PM #5

SniperFido77
Junior Member

11-12-2017, 04:23 AM

It works fine in the device manager. Refreshing didn’t help. Vcore measured consistently at 800mV during testing, staying steady after boot and driver setup.

SniperFido77

11-12-2017, 04:23 AM #6

It works fine in the device manager. Refreshing didn’t help. Vcore measured consistently at 800mV during testing, staying steady after boot and driver setup.