F5F Stay Refreshed Hardware Desktop Issues arising with Gigabyte B460 Aorus Pro device

Issues arising with Gigabyte B460 Aorus Pro device

Issues arising with Gigabyte B460 Aorus Pro device

H
hungry_hippo10
Member
65
10-19-2022, 02:30 AM
#1
Hey folks, I got somehow stuck during troubleshooting why I cannot get my setup up and running again. To me it seems like the mainboard has died but maybe someone out there has a clever idea what I could try before replacing the board. Setup: - Gigabyte - B450 AORUS PRO Mainboard - Xilence - Performance A+ Series 530W PSU - G.Skill - Trident Z RGB 16GB DDR4-3600 Kit - Kingston Technology - A2000 NVMe 500GB SSD - AMD - Ryzen 7 2700X Prozessor 8x 3.70GHz boxed - NVIDIA GeForce RTX 3050 8GB Timeline: - PC was used like usual, no errors / warnings came up - PC was powered off - The next day no signal to the displays, no power on the USB ports. Troubleshooting: These are the steps I already tried out without any improvement / success - Removing BIOS battery + removing any external power source for some time to reset the BIOS settings (Recommendation from Gigabyte service desk) - Uninstalling components (GPU, RAM, SSD, ...) one by one and check if there's a faulted component causing the issue - Checking the CPU for bent / broken pins - Checking if there's video output on the on-board HDMI-port instead of using the GPU As mentioned, maybe someone has a clever idea what I could try or can confirm that this looks / sounds like a broken board. I recorded the behaviour of the onboard status LEDs. Maybe this can give a hint to what's happening. (Video: https://drive.google.com/file/d/130kNi2o...sp=sharing) Many thanks already in advance. Best regards
H
hungry_hippo10
10-19-2022, 02:30 AM #1

Hey folks, I got somehow stuck during troubleshooting why I cannot get my setup up and running again. To me it seems like the mainboard has died but maybe someone out there has a clever idea what I could try before replacing the board. Setup: - Gigabyte - B450 AORUS PRO Mainboard - Xilence - Performance A+ Series 530W PSU - G.Skill - Trident Z RGB 16GB DDR4-3600 Kit - Kingston Technology - A2000 NVMe 500GB SSD - AMD - Ryzen 7 2700X Prozessor 8x 3.70GHz boxed - NVIDIA GeForce RTX 3050 8GB Timeline: - PC was used like usual, no errors / warnings came up - PC was powered off - The next day no signal to the displays, no power on the USB ports. Troubleshooting: These are the steps I already tried out without any improvement / success - Removing BIOS battery + removing any external power source for some time to reset the BIOS settings (Recommendation from Gigabyte service desk) - Uninstalling components (GPU, RAM, SSD, ...) one by one and check if there's a faulted component causing the issue - Checking the CPU for bent / broken pins - Checking if there's video output on the on-board HDMI-port instead of using the GPU As mentioned, maybe someone has a clever idea what I could try or can confirm that this looks / sounds like a broken board. I recorded the behaviour of the onboard status LEDs. Maybe this can give a hint to what's happening. (Video: https://drive.google.com/file/d/130kNi2o...sp=sharing) Many thanks already in advance. Best regards

S
SoyDash
Posting Freak
859
10-19-2022, 10:59 AM
#2
People are excited and engaging with the content.
S
SoyDash
10-19-2022, 10:59 AM #2

People are excited and engaging with the content.

F
FrostyWolfZ
Member
50
10-23-2022, 02:15 AM
#3
The crowd is getting excited.
F
FrostyWolfZ
10-23-2022, 02:15 AM #3

The crowd is getting excited.

R
Ruubiee17
Senior Member
572
10-23-2022, 06:29 PM
#4
Reset the CMOS by restarting the PC, disconnecting the power cord, removing the CMOS battery, keeping the power button pressed for 30 seconds, swapping in a new CMOS battery, and reconnecting the power cable.
R
Ruubiee17
10-23-2022, 06:29 PM #4

Reset the CMOS by restarting the PC, disconnecting the power cord, removing the CMOS battery, keeping the power button pressed for 30 seconds, swapping in a new CMOS battery, and reconnecting the power cable.

C
Creeperm4ster
Member
192
10-31-2022, 02:03 PM
#5
It seems the device is behaving the same way, and there’s no power coming from any USB ports. It probably looks like the board isn’t working at all.
C
Creeperm4ster
10-31-2022, 02:03 PM #5

It seems the device is behaving the same way, and there’s no power coming from any USB ports. It probably looks like the board isn’t working at all.

M
Mike_08
Member
160
10-31-2022, 04:44 PM
#6
It turned out the mainboard was damaged. No visible signs of harm were found. Once I swapped it out with a fresh one, everything functions perfectly once more. Appreciate your help!
M
Mike_08
10-31-2022, 04:44 PM #6

It turned out the mainboard was damaged. No visible signs of harm were found. Once I swapped it out with a fresh one, everything functions perfectly once more. Appreciate your help!