Issue with XMP profile loading during expected periods.
Issue with XMP profile loading during expected periods.
Hello, I installed XMP in BIOS and it should read 14-14-14-34 at 1.35V. The voltages are correct, but hwinfo shows 1.336V. My timings are 16-16-16-38 for the DRAM (2x16GB G.Skill Trident Z 3200MHz). I notice my primary timing in BIOS is 16-16-16-38 and 2N, but I’m wondering if changing it to CL14 and possibly T1 instead of 2N would work since my DRAM ratings match 14-14-14-34.
It seems your system might struggle with the CPU frequency you mentioned. Based on typical specs, I don’t expect much issue unless you have other hardware constraints.
Sure, just make sure AUTO is enabled for the correct settings. Let me know if you need further help!
CPU info: Intel i7 12700K
Motherboard: Asrock Z690 Extreme ATX
Hey, I saw what you were doing. You tried setting everything in Auto and your PC wouldn’t boot properly—so you switched back to 16-16-16-38 to let the CPU start. But now you’re having trouble running your rated CL14 RAM at CL14. What’s going on with that?
Increase DRAM voltage to 1.4-1.45V. The 3200MHz CL14 is a Samsung B die and can easily handle 1.6V with proper airflow, so 1.45 should work fine. Since timings were set manually, it's unlikely other settings were mistyped. It’s a good idea to reset the BIOS to defaults and turn on XMP.
I might reset the BIOS and attempt XMP once more; hopefully it will adjust the timing to 14-14-14-34. Appreciate the help!