Issue with the HDMI 2.1 output from a broken GPU.

Pages (2): 1 2 Next

156

10-08-2024, 02:26 AM

Entonces, após puxar bruscamente o porto HDMI na placa MSI Ventus 3x da sua máquina, alguns pinos ficaram danificados. Você precisa saber onde encontrar instruções para soldar um novo porto HDMI ou alternativas práticas? Como estou no América Latina, prefiro soluções que eu possa fazer diretamente, em vez de enviar uma reclama. Também sou informado que os RMA da MSI costumam não funcionar bem. Aviso: HI GUYS, consegui tirar uma foto mais clara do problema.

KastrulyaDDOS

10-08-2024, 02:26 AM #1

Mikeahl
Member

196

10-08-2024, 03:20 AM

You'll likely need to swap the HDMI connection. If you're unsure or lack the right tools, consider using DisplayPort instead unless you specifically require HDMI 2.1 for 4K@120. A nearby electronics repair shop might handle it. You can follow along to understand the process. Be extra cautious with your valuable devices!

Mikeahl

10-08-2024, 03:20 AM #2

Tree_Tape
Member

10-08-2024, 05:58 AM

It’s okay if the HDMI connection isn’t perfect—swapping it should be simple. Also, the 3080 is a big investment, costing over $1,000.

Tree_Tape

10-08-2024, 05:58 AM #3

It’s okay if the HDMI connection isn’t perfect—swapping it should be simple. Also, the 3080 is a big investment, costing over $1,000.

NeoHo
Junior Member

10-10-2024, 05:24 AM

Check if the pins are warped. Gently attempt to realign them.

NeoHo

10-10-2024, 05:24 AM #4

Check if the pins are warped. Gently attempt to realign them.

DarkBoy__YT
Posting Freak

898

10-10-2024, 11:05 AM

With the right equipment and understanding, it's quite simple, isn't it?

DarkBoy__YT

10-10-2024, 11:05 AM #5

With the right equipment and understanding, it's quite simple, isn't it?

EggbertFTW
Junior Member

10-10-2024, 11:15 AM

It’s not too painful to give it a shot. Just make sure you’re precise about where you place the metal—it shouldn’t cause much trouble. If things go wrong, you can always take it to a repair shop for a computer.

EggbertFTW

10-10-2024, 11:15 AM #6

Edo19
Member

165

10-11-2024, 03:45 AM

The picture you shared shows the pins in question. I’m not sure if they’re bent or broken, and I don’t have a close-up to confirm. If you can describe the details better or share more photos, I’d be happy to help identify them.

Edo19

10-11-2024, 03:45 AM #7

lamellamamama
Member

10-12-2024, 01:29 PM

I believe I should visit a tech repair shop, if one exists, because I’m not from the USA and...it’s tough to locate tech products in my country. My monitor is just a TV, and there aren’t any reliable adapters available for dp 1.4 to cdmi 2.1, so I really have no other option.

lamellamamama

10-12-2024, 01:29 PM #8

grant_182
Junior Member

10-14-2024, 04:57 AM

I'm not sure about the specifics of the CDMI port. The person in the video mentioned certain spacing requirements, but it might need additional considerations beyond that.

grant_182

10-14-2024, 04:57 AM #9

I'm not sure about the specifics of the CDMI port. The person in the video mentioned certain spacing requirements, but it might need additional considerations beyond that.

IMayBeDead
Senior Member

696

10-14-2024, 06:28 AM

#10

They appear straight yet the black casing suggests something is damaged.

IMayBeDead

10-14-2024, 06:28 AM #10

They appear straight yet the black casing suggests something is damaged.

Pages (2): 1 2 Next