F5F Stay Refreshed Hardware Desktop Issue with Ram XMP profile failing to start during boot.

Issue with Ram XMP profile failing to start during boot.

Issue with Ram XMP profile failing to start during boot.

A
Atayack
Member
Find
144
03-11-2023, 07:11 PM
#1
You might want to look into tools that let you adjust RAM settings automatically, such as CPU-Z or Speccy. These can help verify your current RAM configuration and potentially guide you through updating BIOS settings if needed. Also, check if your motherboard supports auto-updating XMP profiles post-boot—some platforms allow this directly from the BIOS. If you're unsure, contacting your GPU manufacturer's support might provide clearer instructions.
Reply
Reply
A
Atayack
03-11-2023, 07:11 PM #1

You might want to look into tools that let you adjust RAM settings automatically, such as CPU-Z or Speccy. These can help verify your current RAM configuration and potentially guide you through updating BIOS settings if needed. Also, check if your motherboard supports auto-updating XMP profiles post-boot—some platforms allow this directly from the BIOS. If you're unsure, contacting your GPU manufacturer's support might provide clearer instructions.

Reply
Reply
A
AwsomeGamer79
Member
Find
137
03-12-2023, 03:09 AM
#2
Try a slower pace. Which processor are you using?
Reply
Reply
A
AwsomeGamer79
03-12-2023, 03:09 AM #2

Try a slower pace. Which processor are you using?

Reply
Reply
K
Kubninjan
Senior Member
Find
389
03-13-2023, 11:13 AM
#3
Your system is an AMD 3900X processor.
Reply
Reply
K
Kubninjan
03-13-2023, 11:13 AM #3

Your system is an AMD 3900X processor.

Reply
Reply
G
GamenMetLeviNL
Senior Member
Find
638
03-14-2023, 06:38 PM
#4
As mentioned by Slottr, you need to lower the frequency when using four sticks. Large 16GB sticks also put pressure on the memory controller. You might want to set XMP manually or adjust the frequency to 2933mhz. Make sure the memory voltage is set to 1.350v. Disabling Gear Down and Power Down modes could be helpful. Raising the CPU SOC voltage may assist the memory controller handle the extra memory.
Reply
Reply
G
GamenMetLeviNL
03-14-2023, 06:38 PM #4

As mentioned by Slottr, you need to lower the frequency when using four sticks. Large 16GB sticks also put pressure on the memory controller. You might want to set XMP manually or adjust the frequency to 2933mhz. Make sure the memory voltage is set to 1.350v. Disabling Gear Down and Power Down modes could be helpful. Raising the CPU SOC voltage may assist the memory controller handle the extra memory.

Reply
Reply