F5F Stay Refreshed Hardware Desktop Issue with Ram Speed Display The system is failing to show the correct ram speed.

Issue with Ram Speed Display The system is failing to show the correct ram speed.

Issue with Ram Speed Display The system is failing to show the correct ram speed.

J
Juan2610
Posting Freak
875
08-02-2022, 10:48 AM
#1
Hi, I just installed the new RAM and ran CPU-Z to check its performance. It’s only reaching 1600MHz while my RAM supports 3200MHz. There are two 8GB sticks installed.
J
Juan2610
08-02-2022, 10:48 AM #1

Hi, I just installed the new RAM and ran CPU-Z to check its performance. It’s only reaching 1600MHz while my RAM supports 3200MHz. There are two 8GB sticks installed.

D
DarkFolle
Junior Member
39
08-17-2022, 03:22 AM
#2
CPU-Z displays actual clock speeds, whereas users often refer to transfer rates, which are typically twice the physical speed. Therefore, 1600 MHz RAM equates to approximately 3200 Mega-transfers each second.
D
DarkFolle
08-17-2022, 03:22 AM #2

CPU-Z displays actual clock speeds, whereas users often refer to transfer rates, which are typically twice the physical speed. Therefore, 1600 MHz RAM equates to approximately 3200 Mega-transfers each second.

K
katnissgirl115
Member
153
08-24-2022, 07:45 PM
#3
Double data rate is 1600 x2 equaling 3200 MHz. Everything looks good. Start it and have fun.
K
katnissgirl115
08-24-2022, 07:45 PM #3

Double data rate is 1600 x2 equaling 3200 MHz. Everything looks good. Start it and have fun.

_
_HawkyShark_
Member
59
09-04-2022, 08:52 AM
#4
This is normal as the above two members agreed. Here's mine: But it's actually 3533. Whatever your BIOS says, that's the authoritive source.
_
_HawkyShark_
09-04-2022, 08:52 AM #4

This is normal as the above two members agreed. Here's mine: But it's actually 3533. Whatever your BIOS says, that's the authoritive source.

K
kbolt
Member
238
09-04-2022, 09:34 AM
#5
thanks!
K
kbolt
09-04-2022, 09:34 AM #5

thanks!

I
imTri
Posting Freak
786
09-04-2022, 10:49 PM
#6
thanks!
I
imTri
09-04-2022, 10:49 PM #6

thanks!

T
TimmyCHI
Member
65
09-05-2022, 05:57 AM
#7
thanks!
T
TimmyCHI
09-05-2022, 05:57 AM #7

thanks!