Issue with RAM performance not meeting expected rates.
Issue with RAM performance not meeting expected rates.
Here’s a revised version of your message:
I’ve put together this build and added an extra set of Crucial RAM I found on sale during Black Friday—it was a solid deal, though I might just return it. Still, my current RAM might not be as good as these new ones. I updated the BIOS to version 3.12 and switched the RAM settings from automatic to Profile 1 for XMP. It doesn’t exceed 3200 MHz. I also tried setting it higher (6000 and 5200), but the system crashes before booting. This is my first attempt at manual configuration, so I’m not sure what to do next. Am I dealing with faulty RAM?
Have you experimented with a single RAM configuration? Using multiple sets can be problematic and may lead to instability or boot issues. It will also limit performance to the slowest module, which is typical for 3200Mhz. If problems persist, check each stick individually—this could help you return or file a warranty claim.
You have two very different kits, which isn't ideal. Additionally, four sticks are scheduled with strict time limits, which is even worse. Consider whether you truly require 64GB of RAM or if it's just something you like.
Apologies, but are you attempting to use two separate RAM modules simultaneously to achieve a total of 64GB or increase RAM capacity at once? I’m not doing that. The G.Skill chip is installed, but I’m unable to reach its maximum speed of 6000MHz—currently capped around 3200MHz. Raising the frequency further prevents the system from booting.
I don't do it that way. The main concern is whether the RAM fits in the QVL and if using a different kit you can still work with it.
You tried installing both sets at once, switching one at a time. The Flare X5 you own works best on a 7800x3d board, needing multiple tries to lock in the EXPO profile and even then using Ryzen Master rather than BIOS. On an Intel system like yours, that path isn’t available—XTU would be a better alternative. As Mark Kaine noted, it’s likely you have good RAM, and QVL kits are a solid choice to handle compatibility issues. While Flare kits are meant for RYZEN (EXPO) setups, Ripjaws kits are built for Intel (XMP). Still, neither should block the other from running in the opposite configuration.