Issue with Patriot Viper RGB XMP settings not functioning.

arianed2001
Member

11-04-2016, 07:46 AM

Hey, I noticed your recent RAM upgrade from Corsair to Viper. When you tried the 2x8GB 3200MHz memory, the system didn’t recognize the XMP profile and only accepted speeds up to 2666MHz. After setting it to 2666MHz, the PC would reset if you tried anything faster. Could be a compatibility issue or incorrect profile settings. Double-check the RAM type, speed, and ensure the motherboard supports those speeds. Let me know if you need help troubleshooting further.

arianed2001

11-04-2016, 07:46 AM #1

KingJaydxn
Member

240

11-04-2016, 08:20 AM

adjusted the voltage to 1.35 volts for dram and set the frequency to 3200mhz as the speed

KingJaydxn

11-04-2016, 08:20 AM #2

adjusted the voltage to 1.35 volts for dram and set the frequency to 3200mhz as the speed

hanredfire
Junior Member

11-10-2016, 04:24 PM

The requested kit isn't compatible with your motherboard's QVL. For memory options on Matisse CPUs (Ryzen 3000 series), refer to the supported list here: https://www.asrock.com/mb/AMD/B450 Steel Legend/#MemoryMS. Select Vendor, then choose Patriot to view part numbers. No 3200mhz memory appears in the available list.

hanredfire

11-10-2016, 04:24 PM #3

nameehasan
Member

231

11-10-2016, 06:02 PM

The DOCP profile functions identically to Intel<|pad|>'s XMP. No manual configuration in the BIOS is required.

nameehasan

11-10-2016, 06:02 PM #4

The DOCP profile functions identically to Intel<|pad|>'s XMP. No manual configuration in the BIOS is required.

Xindis_
Member

249

11-22-2016, 07:41 AM

The previous RAM setup wasn't included in the plan, yet it functioned properly. I was able to reach 3000 MHz using a 1.35 volt supply.

Xindis_

11-22-2016, 07:41 AM #5

The previous RAM setup wasn't included in the plan, yet it functioned properly. I was able to reach 3000 MHz using a 1.35 volt supply.

Luckaz
Member

11-24-2016, 03:27 AM

Adjust the new RAM to 3000 MHz and verify functionality

Luckaz

11-24-2016, 03:27 AM #6

Adjust the new RAM to 3000 MHz and verify functionality

C0mboDombo
Member

11-24-2016, 05:19 AM

Existing setup only functions with voltages up to 1.2 volts

C0mboDombo

11-24-2016, 05:19 AM #7

Existing setup only functions with voltages up to 1.2 volts

united32
Senior Member

433

11-24-2016, 09:57 AM

Proceed with a 1.2v setting at 3000 MHz or any preferred frequency

united32

11-24-2016, 09:57 AM #8

Proceed with a 1.2v setting at 3000 MHz or any preferred frequency

Rinse_SoC
Junior Member

11-28-2016, 02:48 PM

It doesn<|pad|> a stable operation can't be achieved at higher frequencies with 1.2 volts

Rinse_SoC

11-28-2016, 02:48 PM #9

It doesn<|pad|> a stable operation can't be achieved at higher frequencies with 1.2 volts

winnerplay25
Senior Member

477

11-28-2016, 10:04 PM

#10

It seems the previous interaction was successful. Let's continue from there! What would you like to discuss next?

winnerplay25

11-28-2016, 10:04 PM #10

It seems the previous interaction was successful. Let's continue from there! What would you like to discuss next?