Issue with my memory card.

03-18-2023, 01:09 PM

Hi, I've been experiencing memory issues lately. I recently encountered two blue screens with the same problem—MEMORY-MANAGEMENT. I checked my RAM and believe it's installed correctly in the right slots. I've attached some BSOD images along with the RAM layout (note: the photos are a bit old). My current setup has RGB boards on A1 & B1, and Corsair ones on A2 & B2. Thanks for your help!

Mr_Wheeper_

03-18-2023, 01:09 PM #1

AsherDanTDM
Member

03-18-2023, 06:48 PM

It seems there might be a mix-up in the RAM slots. If you're using a Hyper X stick, they typically appear as slots 1 and 2, even if you think they're on slot 3. Make sure to check your CPU-Z settings for accuracy.

AsherDanTDM

03-18-2023, 06:48 PM #2

Chester09
Senior Member

491

04-06-2023, 07:10 AM

Ensure all RAM operates consistently in terms of speed and timing. Differences between brands or speed ratings can lead to unpredictable performance.

Chester09

04-06-2023, 07:10 AM #3

Ensure all RAM operates consistently in terms of speed and timing. Differences between brands or speed ratings can lead to unpredictable performance.

BaccaStrq123
Senior Member

664

04-17-2023, 03:27 PM

I considered it while purchasing the sticks, though the four have DDR4 2400MHz chips.

BaccaStrq123

04-17-2023, 03:27 PM #4

I considered it while purchasing the sticks, though the four have DDR4 2400MHz chips.

RwarCatz
Member

04-19-2023, 05:16 AM

Verify your clock settings — memory speed isn’t the only factor, I think I’d have chosen the same package even without RGB, but that connection is done.

RwarCatz

04-19-2023, 05:16 AM #5

Verify your clock settings — memory speed isn’t the only factor, I think I’d have chosen the same package even without RGB, but that connection is done.

AFairclough
Junior Member

04-19-2023, 06:02 AM

I find hyper x rgb 2400mhz cl15 Corsair vengeance with cl14-16 mhz rating is only part of the story

AFairclough

04-19-2023, 06:02 AM #6

I find hyper x rgb 2400mhz cl15 Corsair vengeance with cl14-16 mhz rating is only part of the story

_Default_503_
Junior Member

04-20-2023, 07:47 AM

In short, I made a mistake by not verifying the timing of the different stick pairs. If this happened, I’ll use one set of the ram sticks and sell the rest to match the kit as Nerdom suggested.

_Default_503_

04-20-2023, 07:47 AM #7

In short, I made a mistake by not verifying the timing of the different stick pairs. If this happened, I’ll use one set of the ram sticks and sell the rest to match the kit as Nerdom suggested.

Deurman
Member

120

04-20-2023, 08:02 AM

That's all clear.

Deurman

04-20-2023, 08:02 AM #8

That's all clear.

EilaMummo
Member

116

04-20-2023, 12:30 PM

Thanks for your assistance, I'm here to help you with any questions you have.

EilaMummo

04-20-2023, 12:30 PM #9

Thanks for your assistance, I'm here to help you with any questions you have.