F5F Stay Refreshed Hardware Desktop Issue with Monitor detecting no signal in random mode.

Issue with Monitor detecting no signal in random mode.

Issue with Monitor detecting no signal in random mode.

T
Tico_32
Senior Member
680
01-26-2023, 03:30 AM
#1
I recently assembled my computer using brand new components. Initially, I expected the monitor to power on first, but only the screen would activate. I connected the monitor to the integrated graphics on the motherboard. The system booted up correctly, but the monitor failed to display anything. It would turn black and then display "hdmi" and "vga in," followed by a "no signal" message before returning to a black screen. After adjusting the RAM, the monitor responded only when I placed it in the first and third slots. Restarting Windows didn’t resolve the issue. When I connected my keyboard, it would activate only if the monitor was properly booted. Plugging in my GPS also produced the same results. The problem appears inconsistent, with no clear pattern. It seems the monitor’s boot-up behavior is unpredictable.
T
Tico_32
01-26-2023, 03:30 AM #1

I recently assembled my computer using brand new components. Initially, I expected the monitor to power on first, but only the screen would activate. I connected the monitor to the integrated graphics on the motherboard. The system booted up correctly, but the monitor failed to display anything. It would turn black and then display "hdmi" and "vga in," followed by a "no signal" message before returning to a black screen. After adjusting the RAM, the monitor responded only when I placed it in the first and third slots. Restarting Windows didn’t resolve the issue. When I connected my keyboard, it would activate only if the monitor was properly booted. Plugging in my GPS also produced the same results. The problem appears inconsistent, with no clear pattern. It seems the monitor’s boot-up behavior is unpredictable.

T
TheBluArtist
Member
179
01-27-2023, 07:46 AM
#2
only slot 1 and 3 are functional, i attempted using just 1 ram.
T
TheBluArtist
01-27-2023, 07:46 AM #2

only slot 1 and 3 are functional, i attempted using just 1 ram.

N
NervousDemon
Member
65
01-27-2023, 11:52 AM
#3
Even with just one RAM module, I encountered the same issue.
N
NervousDemon
01-27-2023, 11:52 AM #3

Even with just one RAM module, I encountered the same issue.

X
xTripleMinerx
Posting Freak
846
01-30-2023, 07:57 PM
#4
could you boot to bios in any chance?
X
xTripleMinerx
01-30-2023, 07:57 PM #4

could you boot to bios in any chance?

F
FionnMacu
Member
147
01-31-2023, 08:11 AM
#5
from the board manual a2 and b2, the first ram channel is also for your gpu. did you connect a dvi-d or hdmi? so adjust the monitor input to match the computer output.
F
FionnMacu
01-31-2023, 08:11 AM #5

from the board manual a2 and b2, the first ram channel is also for your gpu. did you connect a dvi-d or hdmi? so adjust the monitor input to match the computer output.

T
TheDonnelTrain
Member
240
01-31-2023, 03:48 PM
#6
I was able to do it whenever the screen started up.
T
TheDonnelTrain
01-31-2023, 03:48 PM #6

I was able to do it whenever the screen started up.

M
M4rkie
Junior Member
7
02-01-2023, 12:47 AM
#7
I was working with the integrated graphics to resolve the issue, tried a2 and b2 but the problem persisted. When using the GPU, I connected via HDMI.
M
M4rkie
02-01-2023, 12:47 AM #7

I was working with the integrated graphics to resolve the issue, tried a2 and b2 but the problem persisted. When using the GPU, I connected via HDMI.

B
BGStacks
Member
160
02-01-2023, 03:32 AM
#8
then i would verify whether you have bent pins on the CPU; if not, could motherboard RMA time be the next step?
B
BGStacks
02-01-2023, 03:32 AM #8

then i would verify whether you have bent pins on the CPU; if not, could motherboard RMA time be the next step?