Issue with Corsair Vengeance RAM stick and BSOD under XMP settings?

F5F Stay Refreshed Hardware Desktop Issue with Corsair Vengeance RAM stick and BSOD under XMP settings?

Issue with Corsair Vengeance RAM stick and BSOD under XMP settings?

Issue with Corsair Vengeance RAM stick and BSOD under XMP settings?

Pages (2): Previous 1 2

V

Vesgo
Member

230

03-27-2016, 02:11 PM

#11

An unstable overclock might cause issues. You might want to disable it and see if it improves things.

V

Vesgo

03-27-2016, 02:11 PM #11

An unstable overclock might cause issues. You might want to disable it and see if it improves things.

C

Crazy_Heaven
Posting Freak

811

03-27-2016, 04:05 PM

#12

I usually started with OC in Ryzen Master before rebooting, so the system should launch normally. However, I ended up in a BSOD cycle where resetting the BIOS was the only solution (turning off XMP).

C

Crazy_Heaven

03-27-2016, 04:05 PM #12

I usually started with OC in Ryzen Master before rebooting, so the system should launch normally. However, I ended up in a BSOD cycle where resetting the BIOS was the only solution (turning off XMP).

P

Pengery
Member

69

03-27-2016, 05:06 PM

#13

RAM seems quite intricate at first glance. The instructions sent to it require time to process, and they often depend on each other. When something goes wrong, it triggers an error. Pushing it beyond its limits causes failures, but reducing the load enough allows everything to function properly again. The aim is to reach the point where it barely manages to stay in sync without overheating.

P

Pengery

03-27-2016, 05:06 PM #13

RAM seems quite intricate at first glance. The instructions sent to it require time to process, and they often depend on each other. When something goes wrong, it triggers an error. Pushing it beyond its limits causes failures, but reducing the load enough allows everything to function properly again. The aim is to reach the point where it barely manages to stay in sync without overheating.

A

AwakeningTroll
Member

139

03-27-2016, 07:33 PM

#14

A BSOD is merely one form of crash... the typical kind.

A

AwakeningTroll

03-27-2016, 07:33 PM #14

A BSOD is merely one form of crash... the typical kind.

M

mineguiton
Member

202

04-03-2016, 04:10 AM

#15

It works fine now. I adjusted the DRAM voltage to 1.35V, set the frequency to 2933, and turned on XMP. Wow, I really didn’t know what I was doing when I started writing this. Thanks everyone, I gained a lot of knowledge and tried to assist others.

M

mineguiton

04-03-2016, 04:10 AM #15

It works fine now. I adjusted the DRAM voltage to 1.35V, set the frequency to 2933, and turned on XMP. Wow, I really didn’t know what I was doing when I started writing this. Thanks everyone, I gained a lot of knowledge and tried to assist others.

H

hugowouters67
Member

53

04-03-2016, 08:38 AM

#16

Oh no, that wasn't right.

H

hugowouters67

04-03-2016, 08:38 AM #16

Oh no, that wasn't right.

Pages (2): Previous 1 2