Issue with connecting ports to services Port-forwarding problems can occur during setup or updates.
Issue with connecting ports to services Port-forwarding problems can occur during setup or updates.
You're trying to access your router from a PC using a specific port, but you're encountering issues after setting it up in both your FritzBox and firewall. Let's troubleshoot:
1. **Confirm the Port Number**: Ensure you know the exact port number your router is listening on (often 80, 443, or a custom port).
2. **Check Firewall Rules**: Verify that the port is allowed in your PC's firewall settings.
3. **Test from Another Device**: Try connecting from another device to rule out local network issues.
4. **Use a Different Port**: If possible, try a different port to see if the issue persists.
5. **Restart Devices**: Restart both your router and PC to clear any temporary glitches.
If the problem continues, share more details about the port and your setup!
Hi! I'm setting up a custom port 10134 and have the following setup in mind.
The destination is a port used for communication, likely related to network settings. You're attempting to reach it from outside your local network.
You're trying to reach the port from a device on another network, correct?
You're attempting to link to your network? A VPN is required for that. Could you please confirm your response?