F5F Stay Refreshed Hardware Desktop Issue with B550 Aorus Elite RAM performance Speed problems when accessing RAM modules

Issue with B550 Aorus Elite RAM performance Speed problems when accessing RAM modules

Issue with B550 Aorus Elite RAM performance Speed problems when accessing RAM modules

F
FearMeSlaves
Junior Member
46
02-03-2020, 05:52 PM
#1
Hello, I recently purchased a new PC. Here are the details: Motherboard: Gigabyte B550 Aorus Elite CPU: AMD Ryzen 3600 RAM: G.Skill Ripjaws V x2 8GB DDR4-3600 I attempted to enable the XMP profile but it didn’t work. In Windows, the RAM speed remains locked at 2133 MHz. I updated the BIOS to the latest version. I also tried setting the RAM voltage to 1.35V manually, but it didn’t change anything. Could there be another solution? Appreciate your assistance.
F
FearMeSlaves
02-03-2020, 05:52 PM #1

Hello, I recently purchased a new PC. Here are the details: Motherboard: Gigabyte B550 Aorus Elite CPU: AMD Ryzen 3600 RAM: G.Skill Ripjaws V x2 8GB DDR4-3600 I attempted to enable the XMP profile but it didn’t work. In Windows, the RAM speed remains locked at 2133 MHz. I updated the BIOS to the latest version. I also tried setting the RAM voltage to 1.35V manually, but it didn’t change anything. Could there be another solution? Appreciate your assistance.

C
cecedabro
Member
182
02-04-2020, 10:46 PM
#2
Adjust memory frequency by hand. Use a multiplier of 36 for a clock speed of 3600MHz.
C
cecedabro
02-04-2020, 10:46 PM #2

Adjust memory frequency by hand. Use a multiplier of 36 for a clock speed of 3600MHz.

P
PaigeOfTheBook
Senior Member
733
02-11-2020, 07:04 PM
#3
Hi, thank you for reaching out. It seems the issue wasn't resolved as expected. When I interacted with the multiplier, the PC halted booting and required a CMOS reset. I also attempted setting the voltage to 1.35 and the multiplier to 36, but it still didn’t work.
P
PaigeOfTheBook
02-11-2020, 07:04 PM #3

Hi, thank you for reaching out. It seems the issue wasn't resolved as expected. When I interacted with the multiplier, the PC halted booting and required a CMOS reset. I also attempted setting the voltage to 1.35 and the multiplier to 36, but it still didn’t work.

D
DarkKiller_V3
Member
60
02-11-2020, 08:17 PM
#4
Have you solved the problem? I’m facing the same issue too!
D
DarkKiller_V3
02-11-2020, 08:17 PM #4

Have you solved the problem? I’m facing the same issue too!