Issue with Am4 CPU voltage reading detection
Issue with Am4 CPU voltage reading detection
Motherboard : ga-ax370 gaming k5
CPU: Ryzen 1700x
RAM: F4-3200C16D-16GTZB (operating at 2666)
I have a question guys. When I set my RAM to 1.35 volts in BIOS, both the BIOS and monitoring software display it as 1.38v. Do you know which voltage is actually being applied to my RAM?
My problem is that I'm attempting to overclock my CPU using offset voltage. With a +0.012 volt setting, I remain stable at 3.75 hertz, and the load reaches up to 1.38v. I want to keep it below 1.4 volts. Can anyone clarify which voltage is being used? Is it 1.38 or 1.35?
Execute a load test using cpu-z with on-screen display; you'll discover the results. As mentioned, RAM voltage shouldn't affect CPU voltage, so just because the board overvolts RAM doesn't imply the same for CPU voltage.
Assume the higher voltage. Without using a volt meter, you won't be certain 100%, but it's safer to assume the higher value to prevent any possible harm.
I can get you a link to a guide if that helps.
Vakou :
Motherboard : ga-ax370 gaming k5
CPU: Ryzen 1700x
RAM : F4-3200C16D-16GTZB (operating at 2666 MHz)
I have a question, guys. When I set the RAM voltage to 1.35V in BIOS settings, both the BIOS and monitoring software display it as 1.38V. Do you know which voltage is actually being applied to my RAM?
My problem is that I'm attempting to overclock my CPU using offset voltage. With a +0.012V adjustment, I remain stable at 3.75Hz, but the load increases to 1.38V. I want to keep it below 1.4V. Can anyone clarify which voltage is being used? Is it 1.38 or 1.35?
RAM and CPU voltages differ.
Use the cpu voltage value from cpu-z during a full stress test. This represents the actual load voltage.
CountMike :
Vakou :
Motherboard : ga-ax370 gaming k5
CPU: Ryzen 1700x
RAM : F4-3200C16D-16GTZB (runs at 2666)
I have a question, guys. When I set the RAM voltage to 1.35V in BIOS settings, both the BIOS and monitoring software display it as 1.38V. Any insight on which voltage is actually being applied?
My concern is that I'm attempting to overclock my CPU using offset voltage. With a +0.012V adjustment, I remain stable at 3.75Hz, but the load reaches up to 1.38V. I want to keep it below 1.4V. Do anyone know which voltage is being used? Is it 1.38 or 1.35?
RAM and CPU voltages differ.
You didn’t catch my point.