Issue with AIO RGB activation.
Issue with AIO RGB activation.
Initial setup might have been a simple error, yet the RGB on my cooler remains inactive even when the fan spins. I powered on the PC, removed and reinserted the cooler, rewired it, and double-checked everything. Updated all components via updates and the Gigabyte control panel. Despite everything being connected correctly, nothing activates. What’s missing? I assume all connections are secure: fans linked together, into radiator, and two wires from the CPU block (refer to images).
Check the BIOS settings to confirm the mode. It could be ARGB or RGB, and the number of pins might match your setup—make sure the adapter isn’t incorrectly wired with a 4-pin plug into a 3-pin header.
I didn't know I had to turn it on in the bios. It didn't say anywhere so I thought it should just work. It's ARGB. I have the 4 pin one plugged into sys_fan4_pump which has 4 pins and the three pin plugged into D_LED2 which has three pins. Here's a picture showing it turned on, as is.
It might be misconfigured in the BIOS. Since cooler has RGB enabled, it’s likely the fans are receiving signals from the CPU block instead of the cooler itself. The wire connecting the CPU block along the tube probably sends data to the header, but there isn’t a separate RGB cable for the fans to that header.