Is your Ek custom watercooling setup correct?

F5F Stay Refreshed Power Users Overclocking Is your Ek custom watercooling setup correct?

mattanjust
Member

12-09-2023, 02:53 PM

Hey guys, just checking if your pump D5 will give sufficient flow through the loop with those connections. I'm curious if it's enough for a single pump. Thanks!

mattanjust

12-09-2023, 02:53 PM #1

Hey guys, just checking if your pump D5 will give sufficient flow through the loop with those connections. I'm curious if it's enough for a single pump. Thanks!

HeroDietz
Member

12-09-2023, 03:46 PM

No, that D5 would work just as well. I've tested it for years beyond that. You might be able to get by with just the 360mm rad unless you're aiming for serious overclocking. In that case, stock or a light overclock would suffice.

HeroDietz

12-09-2023, 03:46 PM #2

jonkey12
Member

12-11-2023, 12:08 AM

No, that D5 would work just as well. I've tested it for years beyond that. It's possible to get by with just the 360mm rad unless you're aiming for serious overclocking. In that case, stock or a light overclock would be better.

jonkey12

12-11-2023, 12:08 AM #3

Rounyx
Posting Freak

838

12-12-2023, 11:44 PM

Be comfortable unless you intend to incorporate many 90-degree fittings or bends (such as hardline tubing, etc.)

Rounyx

12-12-2023, 11:44 PM #4

Be comfortable unless you intend to incorporate many 90-degree fittings or bends (such as hardline tubing, etc.)