Is this merely a power-related concern?
Is this merely a power-related concern?
It's a push-pull setup, and the CPU stays cool, almost as if it's not even noticeable below that radiator area, similar to room temperature. That’s why I mentioned it before—I expected someone to notice it and think it might be a pull issue. I also reversed the fan direction mostly to direct exhaust out the bottom of the case, but I plan to switch them back to avoid dust buildup on the radiator.
Push or pull? Decide which way works best for cooling. Usually, draw air from the front, expel it from the back and top. Front fans should pull in, rear and top fans push out. Dust buildup on the radiator will persist over time, even with filters. Edited April 19, 2022 by An0maly_76 Updated with more details
From the top, moving forward into the case. This was a test since problems had been ongoing for a while before adjusting the fan directions—only a few weeks ago, just a quick verification was made.
I really don't like that fan configuration. It seems like the top is drawing in air while everything else is losing it. That's exactly the opposite of what I'd do. The bottom fans would clash with the GPU fans, which isn't ideal. A fair suggestion would be to focus on bottom intake and side intake, with top exhaust. To be honest, I'm not sure all those side intakes are necessary. I use a 3080 with two front intakes, one back out, and one top out. Having three fans pushing directly into the GPU should make a huge difference.
Despite possible power concerns, useful tips on configuring airflow and cooling are available. Check out the guide at Overclock Engineer for detailed advice.
Thank you for your feedback. The previous configuration of the fans was essentially the opposite of their current setup.
And indeed, there are some odd noctuid moths scattered around until I managed to attract the newcomers...
I aim to maintain balanced airflow, keeping it equal in and out. Too much airflow out can create positive pressure on the exhaust fans instead of letting them function properly. This might cause the system to push air elsewhere—like toward the back where the GPU is—disrupting the intended air path. I’d prefer to avoid side fans altogether to test the impact, though having at least one could help. People often avoid it because it looks less appealing.
I suggest a minimum of a 1000w power source along with improved cooling. Consider a full water-cooled setup if you lack sufficient airflow in your build. The likelihood that your system stops working is probably due to the safety mechanism protecting the components.
The budget constraints this year limit custom loops, but the plan remains to evaluate the MSRP new-in-box offer. For the PSU, I'm still assessing whether a 1000-watt unit is sufficient or if a higher capacity is better. If opting for a 1200-watt model, it's worth considering if the additional cost prevents overheating issues in the PSU beyond its 1000-watt limit.