Is there anyone providing a straightforward and direct die block installation service?
Is there anyone providing a straightforward and direct die block installation service?
You’re considering whether to send your components or purchase the CPU, Block, and Mobo together. With the high-core processors like 12900, 13700, and 13900, it feels like they’ve surpassed the capabilities of the 9th and 10th generation chips, even with Intel’s improved heat spreader. While a 360mm rad or dual 240/80mm rads works, the real challenge remains efficiently extracting heat from the die. It seems either extreme cooling solutions are needed—either going sub-ambient or using delid. I remember seeing delids with liquid metal and later needing to replace the spreader, but a direct-to-die block appears more reliable long-term compared to temporary fixes like ice-based methods. You might also think about pairing a delid with a powerful air conditioner for extra cooling, though that’s still a guess. For now, a direct-to-die block seems like a solid starting point, even if it feels risky with a $600 CPU. A block cooling the back of the motherboard could also be worth exploring.
They offer a water block solution, though it may void your warranty. If you're okay with that, I'd reach out for a replacement plate.
TL;DR: No, such a service doesn't really exist. The nearest option was Silicon Lottery, but it shut down long ago because overclocking was nearly obsolete. Even with 13th gen, it didn’t gain much traction. Most people who want direct die are skilled enough to handle the risks themselves and wouldn’t pay that high price for convenience.
I believe someone such as Silicon Lottery, an OEM, or another professional would know how to install, apply thermal paste correctly, and set up the cooler properly. They could also provide a warranty for extra charge. I can arrange to ship you the complete motherboard along with the CPU and installed block.
They’re probably seeking a signed disclaimer since they’re canceling the warranty. It seems like someone like Linus Jay, Jay2cent gamersnexus, or others are creating a direct die kit with a CPU—possibly even offering free CPU samples. The goal is to demonstrate how to clean the die using liquid metal to remove solder paste, encouraging people to try it.
It seems you're avoiding exotic cooling methods. Using an A/C to cool your equipment can cause condensation that may damage the hardware, and it involves additional risks. The most reliable approach would be running the entire system inside a controlled chamber, though that might not be practical for you.
Only under very high or low temperatures should I mention things like a 360 rad intake, routing an A/C unit to the front intake, and lowering it by about 10 degrees compared to ambient. It would begin with a direct discharge to the die to improve heat removal.
I misunderstood that part then, that is fairly mild. I would still think about condensation though, there is a formula for when it starts forming that you could use That is extreme again, I would buy a quality delidding tool and use that