Is the CM Hyper Evo 212 a good value for money compared to a budget AIO liquid cooler?
Is the CM Hyper Evo 212 a good value for money compared to a budget AIO liquid cooler?
drea.drechsler :
hmmm...one case fan only...
Does your case have provisions for mounting a 240mm radiator?
Yes, in front of the case I can mount either 2 case fans (120mm) or a 240mm radiator, I can also mount 2 other case fans on the sides, and there is already one on the back of the case, which is the only case fan installed atm.
I was thinking of buying 4 case fans, 2 in front, 2 on the side. Would that make a big change in temps? Since the case tends to become hot after running prime95 for 5 mins.
The 2 front fans would "bring new air in", and the side fans (Which are close to the CPU cooler) would push hot air out along with the back fan.
AssemblerX86 :
drea.drechsler :
hmmm...one case fan only...
Does your case have provisions for mounting a 240mm radiator?
Yes, in front of the case I can mount either 2 case fans (120mm) or a 240mm radiator, I can also mount 2 other case fans on the sides, and there is already one on the back of the case, which is the only case fan installed atm.
I was thinking of buying 4 case fans, 2 in front, 2 on the side. Would that make a big change in temps? Since the case tends to become hot after running prime95 for 5 mins.
The 2 front fans would "bring new air in", and the side fans (Which are close to the CPU cooler) would push hot air out along with the back fan.
In my opinion you should have 2 fans up front and one on the back. I would use any side fans as intake to feed the GFX card more air but I prefer not to interrupt the front to back airflow.
Will it help dramatically? One way to find out. Most likely it won't.
There's no way I would change from my 212 Evo to a budget AIO cooler. From the 212 to a Noctua D15 or a Kraken X62 or a Bequiet Dark Rock Pro 3? Yes.
How can I make the most of my FX 6300?
I need something that works with an AM4 socket for future upgrades.
Update: The high temperatures might be because there are no case fans, which causes poor airflow. When I open the side door, the CPU temperature drops to -10.5°C during stress tests compared to when the case is closed, and it stays more stable. Also, inside the closed case, temperatures tend to build up over time. I plan to install new case fans to see how it affects things.
There aren't many AIOs that stand out as well-made, but a few do. The Cooler Master MasterLiquid ML240R performs quite well for its size of 240. NZXT produces some solid products, though I don't like the CAM feature. I could keep talking about coolers all day, especially since I write large cooler reviews for Tom's.
AssemblerX86:
Tell me the best way to get the most out of your FX 6300?
😀
I need something that still fits an AM4 socket for future upgrades.
Updated: It seems the high temperatures come from insufficient case fans, which causes poor airflow. When I open the side door, the CPU temperature drops to -10.5°C during stress tests compared to when the case is closed, and it stabilizes better. Also, with the case closed, temperatures tend to build up over time. I plan to install new fans to see how it affects things.
Keep in mind that Prime95 applies an unrealistic stress on the processor—often called a 'power virus.' Even if you run tests, open the case and run all fans at maximum speed for safety.
Secondly: many fans are helpful, but their placement matters more. Remember: cool air should enter from the front or bottom, while hot air should be expelled from the back or top. So position fans correctly. Side fans usually help cool the GPU, but I’ve noticed they often disrupt airflow through the case, raising temperatures. It’s better to keep side fan vents open so cool air can flow in with the exhaust fans at the rear or top. Just be mindful of how your case is built and where the GPU is located.
There aren't many AIOs I regard as well-made, but a few stand out. The Cooler Master MasterLiquid ML240R performs quite well for a 240 AIO. NZXT offers decent products, though I'm wary of CAM's tracking features. I often write detailed reviews about large coolers on Tom's site. Would the ML240L provide noticeable CPU temperature gains compared to the Hyper Evo 212?
A lot of this hinges on your overclocking expertise and the voltage needed for stability. But I actually referred to the ML240R, not the ML240L. I've tried both, but I’d only pick one—otherwise someone would lose a life. There are very few AIOs I’d even think about using, honestly... and I already have a room full of them.
AssemblerX86 :
Would the ML240L offer a notable boost in CPU temperature compared to the Hyper Evo 212?
I think you’d notice a clear rise in CPU heat if you swap the Hyper 212 for an ML240 cooler. This comes from your comments about your current setup, the single fan you’ve put in, and how much cooler the temperature drops when you access the case side panel.
It suggests placing the ML240 radiator at the front of your case, letting its fans pull in cooler air through the radiator. It also implies making sure the rear/top fan is set to help expel warm air back outside, ensuring good airflow for effective cooling.
This doesn’t rule out other improvements from adding two front fans and adjusting the rear fan, but it’s hard to say which would give the best processor cooling.
Drea.drechsler would like to know if the ML240L would offer a notable boost in CPU temperature compared to the Hyper Evo 212. He expects better results with an ML240 cooler, citing his current setup, case fan placement, and observed temperature changes when accessing the case. He also mentions the importance of proper airflow for both the front and rear fans. Regarding water cooling, he wonders if replacing the liquid inside could be a viable alternative or if he should stick to standard methods.
You can't swap out the liquid or pump since they're sealed parts. When an air compressor reaches the end of its life, it becomes just a minor part. Your temperatures drop mainly because the intake fans aren't working properly, and a 6300 at that voltage is easy to manage.