IS MY CPU DEAD?

04-17-2016, 12:42 PM

I cleaned my PC with an air compressor and then reassembled everything. It still won’t work. I’ve tried removing the CMOS, reseating the RAM, using an eraser on the RAM, and plugging everything back in. I didn’t find a monitor issue because I tested it on a TV and different cables, but it’s still not functioning. What should I do next?

Awesome_Aaron_

04-17-2016, 12:42 PM #1

ChibiHD
Junior Member

05-03-2016, 10:19 PM

Everything seems connected properly. The fans were attached to the board during cleaning.

ChibiHD

05-03-2016, 10:19 PM #2

Everything seems connected properly. The fans were attached to the board during cleaning.

gamer2hokv
Member

198

05-04-2016, 05:04 AM

I verified the CPU fan and motherboard cables are all attached to the same location on the PSU, and they’re connected correctly.

gamer2hokv

05-04-2016, 05:04 AM #3

I verified the CPU fan and motherboard cables are all attached to the same location on the PSU, and they’re connected correctly.

AdamKoudy
Senior Member

740

05-04-2016, 12:01 PM

Using fans connected to power may cause the board to fail. Start it with the least number of devices attached.

AdamKoudy

05-04-2016, 12:01 PM #4

Using fans connected to power may cause the board to fail. Start it with the least number of devices attached.

buildernumber5
Junior Member

05-06-2016, 08:49 PM

I removed it from the case and connected only the necessary parts. Still, the CPU fan spun and the GPU worked but no sound was heard.

buildernumber5

05-06-2016, 08:49 PM #5

I removed it from the case and connected only the necessary parts. Still, the CPU fan spun and the GPU worked but no sound was heard.

alex4max
Member

05-16-2016, 09:50 PM

Check if your board features diagnostic indicators or sounds. Understand the behavior triggered by pressing the power switch. Confirm whether all items are cleared from the No POST list.

alex4max

05-16-2016, 09:50 PM #6

Check if your board features diagnostic indicators or sounds. Understand the behavior triggered by pressing the power switch. Confirm whether all items are cleared from the No POST list.

EleqTRiX
Member

110

05-18-2016, 11:06 AM

I attempted the no post list but it didn’t work, so I removed parts and reassembled it. It functioned correctly this time. Took me about 8 hours to fix it, thank you!

EleqTRiX

05-18-2016, 11:06 AM #7

I attempted the no post list but it didn’t work, so I removed parts and reassembled it. It functioned correctly this time. Took me about 8 hours to fix it, thank you!