F5F Stay Refreshed Power Users Overclocking Is it worth overclocking for you?

Is it worth overclocking for you?

Is it worth overclocking for you?

Pages (3): Previous 1 2 3
L
liseypop
Member
214
06-28-2017, 06:10 AM
#21
I completely overlooked this, as windows could be restricting the frequency. Check power plans in Windows and adjust the maximum performance plan, then navigate to advanced settings and set Maximum Processor Frequency to 0 or unlimited. EDIT: apply Load Line Calibration (LLC) in BIOS at level 5, ensuring consistent voltage under load.
L
liseypop
06-28-2017, 06:10 AM #21

I completely overlooked this, as windows could be restricting the frequency. Check power plans in Windows and adjust the maximum performance plan, then navigate to advanced settings and set Maximum Processor Frequency to 0 or unlimited. EDIT: apply Load Line Calibration (LLC) in BIOS at level 5, ensuring consistent voltage under load.

_
__Tibs
Junior Member
13
06-28-2017, 06:27 AM
#22
I plan to try this again next week on Sunday or Tuesday. I need to work until Monday.
Next week I have 48 hours to implement changes and thoroughly test everything.
I’ll keep you informed whenever I make adjustments.
Thanks again for all the assistance, and I’ll review what you advised.
_
__Tibs
06-28-2017, 06:27 AM #22

I plan to try this again next week on Sunday or Tuesday. I need to work until Monday.
Next week I have 48 hours to implement changes and thoroughly test everything.
I’ll keep you informed whenever I make adjustments.
Thanks again for all the assistance, and I’ll review what you advised.

W
wwecha
Junior Member
9
07-04-2017, 01:09 AM
#23
I can assist further with my vacation that begins in a week.
W
wwecha
07-04-2017, 01:09 AM #23

I can assist further with my vacation that begins in a week.

J
Jesusnava987
Junior Member
7
07-04-2017, 10:04 AM
#24
how is this going?
J
Jesusnava987
07-04-2017, 10:04 AM #24

how is this going?

H
heroboy17
Senior Member
528
07-08-2017, 10:02 AM
#25
SkyNetRising clarifies that under certain rare extreme conditions, the measurements confirm that the lifespan isn't affected. Most CPUs are built to last 10 to 20 years, even at half capacity, which is still well beyond typical usage.
Drezcips asks why the CPU matters more than the GPU and challenges the assumption that a higher CPU clock would noticeably improve performance. He notes Intel already achieves good frame rates in games, and outside of 1080p, GPUs usually become the limiting factor. He suggests focusing on GPU overclocking rather than CPU tuning unless you're aiming for very high FPS.
He compares scenarios where an 80 vs 90 CPU clock might seem significant, but argues that real-world impact is minimal unless you're targeting those numbers. Drezci recommends starting with GPU testing and then adjusting the CPU settings afterward. He also advises checking maximum stable boosts and ensuring proper cooling, especially when using overclocking tools.
He mentions that running a 1080p test with the scanner can help identify performance limits, and suggests profiling before gaming to avoid unnecessary power consumption or thermal issues.
Overall, he emphasizes balancing CPU and GPU testing based on your specific use case.
H
heroboy17
07-08-2017, 10:02 AM #25

SkyNetRising clarifies that under certain rare extreme conditions, the measurements confirm that the lifespan isn't affected. Most CPUs are built to last 10 to 20 years, even at half capacity, which is still well beyond typical usage.
Drezcips asks why the CPU matters more than the GPU and challenges the assumption that a higher CPU clock would noticeably improve performance. He notes Intel already achieves good frame rates in games, and outside of 1080p, GPUs usually become the limiting factor. He suggests focusing on GPU overclocking rather than CPU tuning unless you're aiming for very high FPS.
He compares scenarios where an 80 vs 90 CPU clock might seem significant, but argues that real-world impact is minimal unless you're targeting those numbers. Drezci recommends starting with GPU testing and then adjusting the CPU settings afterward. He also advises checking maximum stable boosts and ensuring proper cooling, especially when using overclocking tools.
He mentions that running a 1080p test with the scanner can help identify performance limits, and suggests profiling before gaming to avoid unnecessary power consumption or thermal issues.
Overall, he emphasizes balancing CPU and GPU testing based on your specific use case.

Pages (3): Previous 1 2 3