Is it safe to use the OC? I can't adjust the fan speeds.
Is it safe to use the OC? I can't adjust the fan speeds.
Win9x: NO 64Bit: YES GiveIO: NO SpeedFan: YES
System I/O set up correctly
ISA BUS connected at address $0290
Intel Sunrise SMBUS linked at $F000
Detected nVidia GeForce GTX 1060 with 6GB RAM
nVidia I2C0 connected at $3D403E3F
nVidia I2C1 connected at $3D403637
nVidia I2C2 connected at $3D405051
Starting to scan ISA BUS at $0290...
SuperIO Chip identified as IT8628E
ISA BUS detected at $0A40
Starting to scan Intel SMBus at $F000...
I2C for nVidia detected at $3D403E3F...
I2C for nVidia detected at $3D403637...
I2C for nVidia detected at $3D405051...
ISA BUS scanned at $0A40...
IT8628E located on ISA at $A40
Discovered Samsung SSD 850 EVO 250GB on AdvSMART
INFO : SCSI DISABLED due to user setting or presence of iaStorA.sys
CPU detected: Intel® Core™ i5-6500 @ 3.20GHz
Detection complete
ERROR: Fan Controller 0 cannot locate PWM (SB 7xx/8xx PM2@$CCB(onISA@$CCB))
No events recorded.
In SpeedFan, figure out what fan header you have put the rad fan on by using the arrows to raise percentage to 100. Then go to configure, fan control. Add a test fan. Middle of the page, click on controlled. Open up the setting to the right and find the header for the fan. Under the white box to the left click add. This is where you'll get the temp from. Click CPU. If you click again, it'll show the fan curve.
This'll set an advanced fan curve for that header using the cpu temp.
SpeedFan isn't easy to learn, but if you want to control your fans, learn the basics, there is no plug and play automatic switch.
What motherboard do you have?
CPU Cooling: Corsair H45 Liquid Cooler
Motherboard: Gigabyte Z170 Gaming K3
Cant add
https://gyazo.com/fd988fd7b458cefe0b96530761a0c9d4
I understand, but adding the button isn't a feasible solution.