Is it a secure and effective boost for your memory?
Is it a secure and effective boost for your memory?
Hello, your DDR4 RAM has been successfully overclocked from 2133MHz to 3000MHz at 1.350V. It's a good result if the system stability and performance meet your expectations.
1.35V is the maximum recommended for DDR4 IIRC and should be acceptable. XMP settings (especially on Intel platforms) might allow stability up to 1.5V, though that's quite high for DDR4. If your system runs smoothly at 3000MHz with 1.35V, it should perform well. The type of "kit" you're using matters—if it's sold at 2133MHz, pushing to 3000MHz without major timing changes seems unlikely and could hurt performance compared to lower clocks with tighter settings.
Barty1884 shares insights on the 1.35V specification for DDR4 IIRC, noting it's generally safe. They mention XMP profiles might allow stable operation up to 1.5V, though that's quite high for DDR4. They question the stability at 3000MHz with such a voltage and suggest possible timing issues could hurt performance compared to lower clocks with tighter settings. They also thank for the prompt reply and confirm they're seeing good gameplay results.
From a voltage perspective, everything is fine, yes.
If it isn't completely stable, you might notice some fluctuations (it won't damage anything, just be bothersome)... but currently, it seems you're holding up well.
If you wish, you can run Memtest86 to check your memory's stability directly:
https://www.memtest86.com/
HOWEVER, a regular task like gaming or a stress test using tools such as Prime95 or Aida64 should quickly reveal any issues.
From a voltage perspective, everything is fine, yes. If it isn't completely stable, you might notice some fluctuations (it won't damage anything, just be bothersome). So far, it seems stable. You can run Memtest86 to check memory stability directly: https://www.memtest86.com/. But a normal workload like gaming or stress tests such as Prime95 or Aida64 should quickly reveal any issues. I've already completed a RAM stress test with Aida and it went smoothly. Thanks for your support.