is AMD Overdrive Auto-tune reliable
is AMD Overdrive Auto-tune reliable
Hello everyone, I’ve reset all the settings on my computers to their default levels. Recently, I installed an AMD overdrive and used a cooler Master Hyper 212 LED. A few months ago, I added an AMD 8320 processor, and the cooler was the latest upgrade. At that time, I ran AMD overdrive auto tune, which adjusted the processor to 4.2 GHz using its original cooler. Since then, I upgraded my case and installed a new cooler, along with adding an extra 8GB of RAM. Now my system has 16GB of RAM at 1333GHz, but two of my RAM sticks are already capped. Later, I reset everything to defaults again and achieved over 6GHz—specifically 6.2 GHz. The multiplier increased to 31.00x from the base of 200 MHz. I haven’t applied this setting yet because I’m concerned about damaging my system. I do have a spare processor in my room, but if it fails, I might have to replace both the processor and the motherboard.
I read that the AMD overdrive auto tune doesn’t increase clock speeds significantly beyond a 1°C rise and checks each clock for overheating risks. I’m wondering if this reading is reliable.
Please note: the spare processor I have is an AMD FX-4100.
System specifications:
- MSI 970 Gaming motherboard
- AMD FX-8320 processor
- Cooler Master 212 Hyper LED (2 fans in push-pull setup)
- MSI RX 480 Gaming X (8GB RAM)
- Corsair CX750M PSU
- 2x4GB Corsair Vengeance Pro 2133MHz RAM
- 2x4GB Team Group 1333MHz RAM
- 1TB Seagate HDD
- 250GB Samsung 850 EVO SSD
- 5x Red LED Cooler Master Sickle Flow 120mm fans (2 front, 1 back for exhaust)
All components are housed in a Thermaltake Vara C21 RGB case.
It's ideal for monitoring and testing, though not great for overclocking. 6GHz would need significant cooling, possibly with dry ice, to avoid overheating. The CPU might not burn, but performance could be limited. Your memory usage might also increase considerably.
It's ideal for monitoring and testing, though not great for overclocking. 6GHz would need significant cooling, possibly with dry ice, to avoid overheating. The CPU might not burn, but performance could be limited. Your memory usage might also increase considerably.
CountMike's feedback highlights the limitations of using 6GHz settings. It suggests that while suitable for monitoring and testing, it isn't ideal for overclocking. He notes the need for significant cooling with dry ice, mentions potential CPU burnout, and discusses how voltage adjustments affect performance. He also shares his experience of not burning out but experiencing shutdowns after extended use. He plans to increase voltages cautiously once more familiar with overclocking.