Intel BE200 led to X570 motherboard failing to start Windows 11 or prevent installation environments from launching.
Intel BE200 led to X570 motherboard failing to start Windows 11 or prevent installation environments from launching.
I made a small upgrade from my system, switching from a R5 3600 to a 5800X3D. Besides the CPU change, I did these adjustments: swapped the motherboard’s built-in Wi-Fi for a BE200, swapped two extra SSDs (not for the operating system, but copied using Clonazilla and verified with WinMerge), and during a trip I upgraded my case. After everything, I thought I’d have to reset the firmware and possibly the BIOS, but it wasn’t that complicated. I expected a bit of trouble, but Windows refused to start right away—after a second try I pressed the power button and noticed I hadn’t fully seated the monitor. Once that was fixed, it booted but would freeze repeatedly, then reset itself after a few attempts. I tried clearing the CMOS twice and followed default settings, but the BIOS was already up to date for my board. I also attempted a fresh Windows 11 install, but it got stuck and reset multiple times. Eventually, I managed to boot into Ubuntu, where all drives were recognized. Now I’m unsure what to do next—would it be better to wipe the drive and start over, or keep it as is?
BIOS version F38f is currently active. I didn't upgrade from F38d after the initial boot failures. The issue appears to involve the Aorus logo and a spinning wheel animation. Video evidence is available under VID20231116052934.mp4.
Refer to the subsequent update, both BIOS versions should function properly. I made the change just in case. However, Windows still wouldn't boot, even the setup environment didn't succeed. Since Ubentu (portable) worked, I'm confused... I thought the RAM might have failed during startup. I plan to run a memtest soon. Perhaps I should reinsert the CPU? But that doesn't really add up if Ubentu did work.
It seems the BE200 is responsible for the issues. I reinstalled the old Wi-Fi card and the system started quickly. I ran a SFC check to verify everything. At the same time, I installed the BE200 drivers. Hope it works (if not, maybe try the AX210 instead). The stock cooler for 3600 is really bad, but it's the only option I have without removing the AIO.
I've verified the BE200 is the issue preventing Windows boot. It remains functional even after installing drivers or using a PCIe adapter for the M.2 NGFF. I updated the description to highlight this. Users on AMD systems should proceed carefully during upgrades. I also tried an AX210 and it resolved the problem.
Confirmed. I purchased a BE200NGW kit (B0CM8QNBY7) and installed it on an AMD B550 motherboard, but it fails to boot. The system displays the BIOS logo and then restarts repeatedly.
It looks like a fresh BIOS update will be required. Since the B550 is considered the last generation, similar to my X570, we might never find one available. Intel could have chosen the proprietary CNVio2 instead of the standard PCIe, considering the E-key connector design seen in other cards like AX201 and AX211. This is disappointing because AX200/AX210 used PCIe, and now I’m stuck using an AX210. Disappointed that Intel is pushing for a compatible CPU to support their Wi-Fi features...
The most intriguing part was trying the BE200 on an old machine with an AM3 socket from ASUS, released in 2010. It worked perfectly on it.