Installed a fresh RAM module but can't activate XMP settings.
Installed a fresh RAM module but can't activate XMP settings.
Hello everyone, I'm attempting to enable XMP on my system via the UEFI setup. I encounter a warning stating that previous overclocking adjustments were unsuccessful. To explain the situation: I've been using this configuration for over a year. About two weeks ago, I added a second RAM module (two 16GB sticks) and paired it with my existing one (two 8GB). Earlier, when I first assembled the PC, I enabled XMP immediately and faced no problems. Two weeks prior, after installing the new RAM, I didn't adjust XMP settings. I also ran MemTest86 for roughly two hours without any issues, though it doesn't confirm the RAM's absolute condition. Recently, I've started experiencing crashes during gameplay—particularly in Snowrunner, which I play frequently. The logs indicate a "faulting module name" error, pointing to a potential issue with the RAM. I also noticed crashes in GTA 5 after playing for a while, which didn't resolve even after a crash report. I tried various fixes: changing voltages, tweaking timings, and even using MSI Dragon Centre's DPC Tuner. However, XMP remained disabled, and attempts to restart it failed with the same warning. Eventually, I reverted XMP and managed to play Snowrunner for six hours and GTA 5 for about four hours without any crashes. After resetting XMP, I was prompted to enter setup via F1 and F2, but the process consistently failed with the same error. I've also explored other methods, yet nothing worked. Now I'm considering a clean OS reinstall, though it would delay my dissertation deadline by a few days. I also found out that the old RAM isn't listed in MSI's compatibility database, while the new one is. It seems the kits might not be fully compatible with each other when using XMP, or the memory modules lack the necessary intelligence to handle advanced settings. I'm curious if you have insights on this matter.
Review the CBF instructions carefully, confirm your bios is current. Disinstall the previous 8gb drives and turn on XMP support.