Installation of ASUS RTX 5060 Ti results in a black screen.
Installation of ASUS RTX 5060 Ti results in a black screen.
Hello, I upgraded my graphics card in May and have been experiencing black screens and stability problems since. I'm seeking advice on possible solutions. Before the upgrade, my MSI RTX 4060 was running smoothly with default drivers. After installing the new ASUS RTX 5060 Ti (16GB), everything worked perfectly. The issue started after installing the new graphics card. Initially, the card functioned normally with no problems. I then downloaded NVIDIA drivers, but during installation the old drivers would disconnect and the screen would remain black until the new ones connected. Now, when I try to install drivers for the 5060 Ti, the display stays dark and the PC doesn't respond—no restart or power button works. After a hard shutdown, the ASRock logo briefly appears before the monitor cuts off and the system freezes again. The only way to see anything is to lower the PCI-E generation to Gen 4 or lower. However, even then the system is unstable, with crashes under stress and kernel power errors after each reboot. I sent the card back to ASUS for replacement but they said it was a prebuilt unit and refused further help. I also let my 30-day return window expire on Newegg, so I can't exchange it. I'm looking for alternatives or fixes. I've tried: updating VBIOS with NVIDIA's tool, switching drivers, changing encoding settings, lowering RAM speed, enabling CSM, updating BIOS, using HDMI instead of DisplayPort, using a different PCI-E slot, checking the cable and connections, and even reinstalling Windows. Nothing seems to resolve the problem. What else could I try?
Your troubleshooting approach looks detailed, but your PSU really stands out. The Apevia PR-600W isn’t comparable to your CPU or GPU. With an RTX 5060 Ti on PCIe Gen4, power issues can cause those intense black screens and kernel power 41 errors you’re experiencing. If possible, replace it with a solid 650–750W model like Corsair RMx or Seasonic Focus before trying more BIOS adjustments. You might resolve the “GPU problem” once the power supply is reliable.
Hi, thanks for your message. I understand you're facing similar concerns from other communities and are weighing your options. The absence of video signal on PCI-E Gen 5 might be due to its focus on POST functionality rather than high-power operations. Regarding power delivery during startup, it's possible spikes can occur when Windows boots up, even if the device itself consumes minimal power. Let me know if you'd like more details!
Yes, even after POST the GPU still experiences brief dips on the 12V rail. These aren’t caused by heavy gaming workloads but rather by the demands of PCIe Gen4/Gen5 setup and initialization, which can generate short-term spikes. If the power supply can’t manage these fluctuations smoothly, the GPU might struggle to maintain a steady signal—resulting in no video output on Gen5. This explains why a slightly weaker PSU may allow booting on Gen3 but fail on Gen4 or Gen5. Stronger units with better transient handling, such as Corsair RMx, Seasonic Focus, Super Flower Leadex, etc., usually resolve the issue. To confirm before purchasing, you could check the card’s PCIe version in BIOS; stable performance indicates the PSU is likely the limiting factor during link training.
Target a robust unit delivering 650–750W, boasting at least 80+ Gold efficiency and strong transient performance. Modular design adds value but isn't essential. Solid options in this range include Corsair RMx 2021, Seasonic Focus GX, and Super Flower Leadex III. These models comfortably support a 5060 Ti while sidestepping Gen4/Gen5 instability. For future-proofing, 750W provides the ideal margin.
Adjust PCIe settings manually to Gen3 in BIOS for better stability. Replace the GPU and inspect pins or debris in the slot. Ensure power cables connect to separate PSU rails where feasible. Upgrade BIOS to the newest release, as it contains fixes for many PCIe/Gen4 issues. If problems persist, try the GPU on another system or swap it with another board component to verify the issue source.
Tried relocating the SATA cable for the CPU cooler to a different PSU and removed extra peripherals to open PCI-E lanes. Both attempts failed. BIOS is up to version 10.03. ASUS confirmed GPU compatibility during RMA, which passed. Previously owned an RTX4060 that functioned well on the motherboard. Using PCI-E Gen 3 still caused instability, with Microsoft Flight Simulator (DXGI_ERROR_DEVICE_HUNG) crashing upon launch. Earlier with PCI-E Gen 4 I experienced repeated crashes. See report here: https://imgur.com/a/UNk2KvN
Recent progress... I've managed to start using PCI-E Gen 5 in a few confusing situations. It seems to happen after swapping or reinstalling RAM, or when certain BIOS functions activate and slow the boot process (like CMOS). I'm not sure what this means, but I thought it worth mentioning.