Installation instructions for PSU

Black_Smile
Junior Member

07-06-2016, 01:33 PM

Your project has been modified to remove vents from both the bottom and top sections. The Seasonic 1000v indicates an upward orientation.

Black_Smile

07-06-2016, 01:33 PM #1

Your project has been modified to remove vents from both the bottom and top sections. The Seasonic 1000v indicates an upward orientation.

MrCm
Senior Member

636

07-06-2016, 08:27 PM

You can adjust it to face upwards; it doesn't affect the PSU, just ensure it has proper airflow and everything is functioning correctly.

MrCm

07-06-2016, 08:27 PM #2

You can adjust it to face upwards; it doesn't affect the PSU, just ensure it has proper airflow and everything is functioning correctly.

Admiralfiggins
Member

211

07-07-2016, 07:15 AM

You're wondering about your 3090's high heat output.

Admiralfiggins

07-07-2016, 07:15 AM #3

You're wondering about your 3090's high heat output.

Mister_Token
Member

202

07-14-2016, 12:19 PM

PSUs tend to operate more quietly when placed with the fan facing outward. For fanless units, they need to be mounted with the open side toward the interior of the enclosure. The exhaust air from the graphics card cooler isn't close to the chip's temperature.

Mister_Token

07-14-2016, 12:19 PM #4

AlphaMale_
Member

07-14-2016, 08:35 PM

It seems there are inconsistencies in the design. The gaps aren't matching, and the PSU plate isn't properly aligned.

AlphaMale_

07-14-2016, 08:35 PM #5

It seems there are inconsistencies in the design. The gaps aren't matching, and the PSU plate isn't properly aligned.

SimpleBuilder
Member

134

07-19-2016, 02:45 AM

Because your power supply includes a fan and the chassis is designed for a single position, this guides the proper installation method.

SimpleBuilder

07-19-2016, 02:45 AM #6

Because your power supply includes a fan and the chassis is designed for a single position, this guides the proper installation method.

Almenium
Junior Member

07-19-2016, 08:23 AM

Almenium

07-19-2016, 08:23 AM #7

benbossgaming
Member

07-27-2016, 01:48 PM

I had no idea. Therefore, I chose to place it face down.

benbossgaming

07-27-2016, 01:48 PM #8

I had no idea. Therefore, I chose to place it face down.