Install PF Sense on your device smoothly.
Install PF Sense on your device smoothly.
I’m working on setting up a PF Sense router with an SSD as the boot medium. I downloaded the installer from the official site and used the 64-bit version with VGA and Memstick tools. My system runs a 3570K processor, has 8GB RAM, and a 128GB Sandisk SSD. It seems to freeze or hang during installation. The support team seems frustrated, but I’m not sure what’s going wrong. Any suggestions would be appreciated!
I created a DVD with the ISO and used that method instead—it functioned. Switching to Legacy might have produced similar results. Thanks!
This router is incredibly powerful. What bandwidth capacity does it support? Also, keep in mind that the WiFi in pfSense is practically non-functional even if you manage to connect; it doesn't handle 802.11n or 802.11ac. If you intend to use WiFi, you'll likely need a dedicated access point or an older router set up as an access point with DHCP disabled and connected via a LAN port.
Yeah, it was just a mistake. I fed the F with bad routers and thought about turning my HTPC into a powerful router. It’s getting some good packages running, so it isn’t completely wasted. I have a fast fiber connection at home. The Wi-Fi card is just there because it came pre-installed, I didn’t really intend to use it. But if it worked well, I might think about using it properly. The box is in a pretty bad spot in the house.
I hope the PFSense team could improve this further. FreeBSD runs as a server OS, so it usually doesn’t get much Wi-Fi attention. (Everyone knows Wi-Fi is often lacking on Linux) But PF Sense works well as a captive portal. I’ve used it as a backup Wi-Fi for a stubborn router that needed reboots—it stayed very stable and reliable with compatible hardware. For a relative, it ran smoothly for about six months without any interruptions, as long as the hardware was suitable. Maybe more people adopting TrueOS and GhostBSD on laptops will push FreeBSD’s Wi-Fi support forward.
Linux usually handles WiFi fine for regular use. But setting up an Access Point is problematic. Vendors likely prioritize their own drivers to maximize profits, which can hurt standard stock options. With pfSense, the experience is frustrating. I’d prefer a larger board if I could install a better Atheros 802.11ac card. My TP-Link Archer C7 is causing major CPU issues. I’m considering moving it to a Linux server, but I’m hesitant unless I’m confident it’ll perform better. Trying the C7 in Linux didn’t work well at all. It seems this model isn’t ideal for high-speed needs, especially if you plan heavy packet analysis.