Instability occurs with XMP 3600MHz on the latest Ryzen 7 setup
Instability occurs with XMP 3600MHz on the latest Ryzen 7 setup
Discussing what you mean? Could be about Genesis 1? Make sure you're getting the right info, bro. The specs mention a 3200MHz system memory, DDR4 type, and channels—details from AMD's Ryzen processors and compatible motherboards. Refer to the provided links for full technical details.
Absolutely, LPX SK Hynix is a real concern. I doubt Intel would be happy with this type of memory. Hope more buyers look into it first and then assume it will perform as advertised. It’s frustrating for them.
I believe 3200Mhz is quite attainable, yet at 3600MHz a voltage of 1.350V might be too low for the DRAM side. This is my suggested approach for manual memory configuration: when adjusting in BIOS, begin with a small increment, starting around 3000MHz, then move up to 3066Mhz, and finally set the DRAM voltage to 1.3500V. Save your changes and exit BIOS. If you encounter issues, a boot loop will occur and settings will revert to defaults, indicating instability during memory OC. If it remains stable enough for Windows, perform a quick stress test—Cinebench R15 works better than R20. Afterward, restart and return to BIOS. Remember, stability in testing doesn’t guarantee performance during gameplay. Windows error codes about memory will signal instability. If problems arise, gradually increase the DRAM voltage in steps of 0.010V (e.g., 1.360V, 1.370V, etc.), but avoid going beyond 1.450V. Once you reach a stable frequency like 3000MHz, you can continue up to 3266MHz or more, testing each time for consistency. This method helps you gradually optimize, though results may vary.