Inquiry about DDR3 delay and speed settings.
Inquiry about DDR3 delay and speed settings.
You're considering several factors when selecting an SB machine. Latency and timing are closely related, though they aren't exactly the same—timing refers to how quickly components respond, while latency often describes the delay in data transfer. The 9-9-9-24 spec suggests a relatively fast setup, which is beneficial for performance.
Regarding the RAM, 1333 and 1600 modules are nearly identical in cost, so the choice between them shouldn't be major unless you have specific needs. The modules come with heatsinks, which can help with cooling, though their necessity depends on your system's heat output.
The Chinese brand "Kllisre" seems to have positive reviews, so it might be worth exploring. As for DDR3 RAM, you're right to be cautious—local availability and reliability are important. If you're not overclocking, it's probably safe to stick with used Kingston sticks unless you have a compelling reason to upgrade.
In summary, the 1600MHz RAM sticks should work fine on a H61, and the heatsinks likely add minimal benefit. Consider your budget, availability, and long-term needs before deciding.
The JEDEC fail-safe specs usually cover DDR3-1066 or DDR3-1333 MHz. DDR3-1600 9-9-9-24-2T at 1.5V or 1.60V is common, and some sets are even rated for 1.65V. You shouldn't be concerned about latency unless the timing is very loose, like DDR3-1600 with CL11 settings.
I've previously placed orders for CPUs, fans, and an Xbox 360 controller from AliExpress. I mostly regret nothing except the controller, which isn't great. There are many Australian YouTube channels, like 'Tech City Yes' and 'Phillis Computer Lab,' that review hardware bought from AliExpress and actually suggest purchasing there. Overall, AliExpress is fairly trustworthy, provided you buy from reputable sellers with good ratings. I don’t understand much about memory beyond its frequency and 'DDR version'—that’s good news. Still, would you prefer 1333MHz modules for extra safety? I’m thinking about upgrading to a Haswell model later, so higher frequency could be useful. This might help, but it’s uncertain. Thanks!
Explore available options, but DDR3-1333 / 1600 / 1866 MHz works well. Timing patterns around 9-9-9-24 are typical for DDR3-1333 at 1866 MHz. When density increases (like 8GB vs 4GB per stick) or frequency rises (1866MHz+), latency values become more varied.