Inquiries regarding new build specifications and ram overclocking potential of your system.
Inquiries regarding new build specifications and ram overclocking potential of your system.
Setting up a new PC is exciting, especially since you're just starting out. You've gathered all the parts except RAM and are considering a V-socket RAM. You're thinking about aesthetics and long-term performance, so you're choosing a 3400MHz option.
Regarding overclocking: The specs suggest your Ryzen 3000 APUs have weaker memory controllers compared to older Zen+ chips. At 3466MHz or 3600MHz, it's possible but not guaranteed. Your goal is around 3466MHz or 3200MHz for stability. The M.UI listing shows supported frequencies up to 3733MHz, so 3600MHz might be feasible depending on the controller. However, since 3600MHz isn't explicitly listed, it's safer to aim for 3466MHz or lower unless you're confident in stability.
Your motherboard supports 3000, 3200, 3466, and 3733MHz, but 3600MHz isn't mentioned. It seems the chipset might not fully support that speed. You could downclock to a more stable frequency if needed. The F4-3600C18D-16GTZRX is a good choice—it's designed for higher performance and has solid reviews.
For RAM, the QVL list doesn't confirm certification at 3600MHz, but some users have reported success with higher speeds. Since you're open to downclocking for stability, it's reasonable to proceed with the F4-3600C18D-16GTZRX and aim for 3466MHz or 3200MHz.
Build list reference: [PCPartPicker](https://it.pcpartpicker.com/list/gpxG2V)
In short, it's doable but keep an eye on stability. If you're unsure, starting at 3466MHz is a smart move.
It's a possibility, right? Likely they haven't tried the 3600MHz version, but that shouldn't matter. Yes, I wouldn't mind QVL too. If the CPU can handle that memory setup (like 2x8GB or 4x16GB), I'd expect it to work.