Inquiries regarding BIOS updates and RAM overclocking
Inquiries regarding BIOS updates and RAM overclocking
Hey, I have two Corsair Corsair Vengeance RGB Pro RAM sticks (CMW16GX4M2C3200C16). They’re meant for 3200mhz, but using the XMP profile on my AORUS B450 Pro Wifi board with a Ryzen 5 2600X causes random blue screens and my game Warframe crashes. I think I need to fix it myself: first, I should check if I can install the newest BIOS update directly, not just the incremental ones. Apparently, some updates require specific steps unless they say otherwise. In my case, past updates had extra procedures before installing. Does that still matter for the latest version?
Second, I thought updating would let me run XMP without problems, but I learned the Ryzen 5 2600X only supports up to 2933mhz. How do I adjust that? I remember there’s a calculator for BIOS settings, but I haven’t used it in years and wasn’t sure what to do. I’m frustrated by all the confusing info about timings, voltages, and latency. Thanks for your help.
You have options to explore, but first grasp that XMP/DOCP is essentially an overclocking technique. It relies on several factors: the RAM itself, the motherboard’s design (connectivity, layers), and the CPU, especially its integrated memory controller. Begin by updating your BIOS. Verify whether your RAM is listed in the QVL for that specific board. If it appears, you should be able to enable XMP/DOCP. If not, you may still have a chance. Start with the Ryzen DRAM Calculator and follow its recommended settings. Beyond that, understand the memory overclocking options on your board and experiment gradually in small steps. Some helpful tutorials exist, though they aren’t tailored to your exact setup—overclocking RAM isn’t just copying another person’s configuration.
XMP is just a profile with timing, frequency, and voltage adjustments. It doesn’t mean you’re overclocking—your RAM is rated for 2133MHz, and if you run it faster or use tighter settings, it would be considered overclocking. The CPU may officially support 2133MHz, but that doesn’t guarantee it will run above that. There’s a Ryzen Dram Calculator, but its timings are very general and you can usually achieve much closer settings. Optimizing RAM timings takes a long time; unless you’re ready to spend weeks testing, sticking with your default settings and a 2933 or 2800MHz frequency would be better.
The issue lies with the RAM you're using for your Ryzen setup, particularly when trying to overclock. It's not ideal because it's near the performance limit and tends to become unstable outside its rated specifications. The main concern is that even if you manage to get it running, you won't see significant speed improvements—especially since you'd likely need to adjust timing settings extensively. In short, with this combination it's challenging to push the clock beyond around 2933 MHz. You might try a different RAM model, such as Samsung B-DIMM, which is known for better stability and overclocking support. You can find more details here: [B-Die Info](https://benzhaomin.github.io/bdiefinder/).
Keep in mind, B-DIMMs are generally more reliable and easier to manage than other types. Adjusting timings can help, but it won't guarantee noticeable gains. If you're stuck, testing different RAM options is a good next step. Good luck, and don't give up!
I understand your point, but it seems the approach you described aligns with the intended specifications. Using a profile that matches the JEDEC speed ratings for the memory module is actually a standard practice. This explains why QVLs are necessary and why manufacturers don’t always back the advertised speed on packaging.
You might consider increasing the voltage a bit—like 1.4 or 1.45 instead of the default. Updating your BIOS probably won<|pad|> a bit, but I doubt it will unlock any special features. I really wish for a 2K FCLK on my 5900, but that’s not looking good. Good luck!
Your memory speed is currently 2133Mhz, but you want at least 2933Mhz. It seems your RAM was installed a year ago, possibly in 2018. Check the BIOS settings on your motherboard to see if you can upgrade or adjust the frequency. Ignore any warnings from previous updates unless they indicate a necessary change.